facebook-script

LABORATORY TESTS

Materials

Itecons offers a wide range of accredited and non-accredited tests to perform in laboratory conditions or in situ, for the characterisation of materials used in construction works, in the development of new solutions for construction or for CE marking.

Testing areas (15)
Products (101)

Reference Designation/Description Accredited
assay
Reference
standards
Product/
Material
Comments (Administrator)
PNT.10 Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency); EN 14146:2004 (Method 5.2) Natural stone, Dimension stone
PNT.11 Determination of the slip resistance by means of the pendulum tester EN 14231:2003 Natural stone, Dimension stone
PNT.12 Determination of water absorption coefficient by capillary EN 1925:1999 Natural stone, Dimension stone
PNT.14 Determination of breaking load at dowel hole EN 13364:2001 Natural stone, Dimension stone
PNT.15 Absorption and bulk specific gravity of dimension stone ASTM C97/C97M-18 Natural stone, Dimension stone
PNT.16 Compressive strength of dimension stone ASTM C170/C170M-17 Natural stone, Dimension stone
PNT.17 Flexural strength of dimension stone ASTM C880/C880M-18 Natural stone, Dimension stone
PNT.18 Modulus of rupture of dimension stone ASTM C99/C99M-18 Natural stone, Dimension stone
PNT.19 Determination of sound speed propagation EN 14579:2004 (except Annex A) Natural stone, Dimension stone
PNT.20 Determination of rupture energy EN 14158:2004 Natural stone, Dimension stone
PNT.22 Determination of the slip resistance by means of the pendulum tester ASTM E 303 - 93 Natural stone; Dimension stone; Pavement
PNT.23 Determination of resistance to fixing (dowel hole) of agglomerated stone EN 14617-8:2007* Agglomerated stone The normative document indicated with * is void, and its tecnical validity is not in question.
PRD.01 Determination of dimensions EN 772-16:2011 Masonry blocks
PRD.02 Determination of the flatness in masonry block faces NP EN 772-20:2002, EN 772-20:2000/A1:2005 Masonry blocks
PRD.03 Determination of compressive strength EN 772-1:2011+A1:2015 Masonry blocks Range: 0 to 60 MPa