Hybrid stove capable of operating with firewood or pellets
Framework
The European biomass domestic heating equipment market is currently facing significant challenges related to energy efficiency, emission reduction, and adaptation to different types of fuels. Most of the available stoves have limitations in operating flexibility, heat retention, and automation of combustion and maintenance processes. At the same time, the report of the European Union Product Safety Forum (2024) noted that more than 35% of the biomass systems analysed were suspected of non-compliance with current legislation. Thus, the increased stringency of environmental regulations and the growing demand for sustainable and low-impact solutions drive the need for innovation in the sector.
The ECO WOOD STOVE project arises to respond to these needs by integrating technological advances and Ecodesign principles into a hybrid stove capable of operating with firewood and pellets, offering high performance, reduced emissions and increased comfort. The solution will include intelligent combustion control, thermal storage with phase change materials (PCM) for prolonged heat release and automatic ash removal, all in a compact, modular and aesthetically appealing design.
Main objective
The ECO WOOD STOVE project has the following strategic objectives: to develop a technologically differentiated product that ensures ≥ 90% efficiency for pellets and ≥ 80% for firewood; To reduce CO and particulate emissions compared to the reference market; To increase user comfort through automation and maintenance reduction; To incorporate Ecodesign in all stages of development, promoting circularity and sustainability; To position the beneficiary as a reference in innovative, sustainable home heating solutions adapted to different markets.
These objectives are in line with LARUS' innovation strategy, which focuses on technological differentiation, anticipation of future environmental requirements and expansion into demanding international markets, ensuring competitive advantage and positive environmental impact.
Project activities and expected results
The ECO WOOD STOVE project has a total duration of 30 months, and the work is expected to take place according to the following structure:
Activity 1 – Preliminary studies and specifications
The work plan begins with an activity that aims to establish the technical and strategic bases for the development of the solution. This activity includes a technological surveillance action, which will allow the identification of trends, innovations and emerging solutions in the field of biomass domestic heating systems. In parallel, the applicable regulatory framework will be carried out, as well as a benchmarking of existing solutions, allowing the identification of legal requirements, certification standards and good market practices. Finally, to define the specifications, a survey of operational needs will be carried out with users and technicians in the sector, leading to the definition of the functional requirements of the stove to be developed.
Activity 2 – Development of the ECO WOOD STOVE solution
This activity focuses on the conception and design of the solution, through the combination of different technologies, which will increase efficiency and operational autonomy (A2). The development of numerical models will begin, which will simulate the phenomena of combustion, heat transfer and air circulation inside the chamber, serving as technical support for the physical project. At the same time, laboratory simulators will be adapted to test the different subsystems or modules of the stove in a controlled environment. Through the generation, evaluation and selection of concepts, it will be possible to identify the most promising architecture of the solution, which will serve as the basis for the prototype. This activity also includes the development of a thermal energy storage subsystem, which will incorporate high thermal inertia materials or phase change materials (PCM), and prolong the release of heat after the end of combustion. At the same time, intelligent automation and control modules will be developed, including sensors for detecting the rate of fuel consumption and ash production, and algorithms for optimizing the air supply and fuel refuelling alerts, taking into account the desired environmental conditions. Finally, all components will be integrated into the design of the complete system.
Activity 3 – Prototype Construction
The construction of the physical prototype of the ECO WOOD STOVE equipment begins with activity A3, which includes the assembly and interconnection of all modules (combustion chamber, thermal storage and intelligent sensing and control) resulting in functional equipment. This activity includes a preliminary testing phase, with a view to identifying necessary improvements or changes, allowing to optimize performance before the validation phase.
Activity 4 – Validation Tests
The evaluation of the thermal performance, combustion efficiency, the behaviour of the intelligent modules and the overall response of the system in continuous operation will be carried out during the A4 activity to validate the developed solution. In a second stage, pre-certification tests will be conducted in the laboratory prototype, in order to verify compliance with safety standards and environmental requirements applicable to the European market. This work package includes a life cycle assessment (LCA) of the system, which will allow the quantification of the environmental impact associated with the production, use and end of life of the stove, contributing to the optimization of its environmental performance.
Activity 5 – Dissemination and Promotion
This activity aims to develop and implement an integrated communications plan; disseminate the technical and scientific results at national and international events; and promote the project at both commercial and institutional levels.