Itecons can assist the manufacturer of construction products in characterizing their products through the experience of our technicians and laboratory conditions that we provide.
| Reference | Designation/Description | Accredited assay |
Reference standards |
Product/ Material |
Comments (Administrator) |
|---|---|---|---|---|---|
| ARG.08 | Determination of dry bulk density in hardened conditions | EN 1015-10:1999, EN 1015-10:1999/A1:2006 | Mortars | ||
| ARG.09 | Determination of adhesive strength of hardened rendering and plastering mortars on substrates (laboratory conditions) | EN 1015-12:2016 | Mortar | ||
| ARG.10 | Determination of adhesive strength by the pull-off in situ method | Internal Procedure ARG.10.IE.01 (version no. 5 of May 2020) equivalent to EN 1015-12:2016 | Coatings | ||
| ARG.12 | Determination of water absorption coefficient due to capillary action | EN 1015-18:2002 | Mortars | ||
| ARG.13 | Determination of adhesive strength by the pull-off method | EN 1542:1999 | Products and systems for the protection and repair of concrete structures | ||
| ARG.14 | Determination of compressive strength | EN 12190:1998 | Products and systems for the protection and repair of concrete structures | ||
| ARG.15 | Determination of modulus of elasticity in compression | EN 13412:2006 Methods 1 and 2 | Products and systems for the protection and repair of concrete structures | ||
| ARG.16 | Determination of resistance of capillary absorption | EN 13057:2002 | Products and systems for the protection and repair of concrete structures | ||
| ARG.17 | Determination of restricted shrinkage and expansion | EN 12617-4:2002 | Products and systems for the protection and repair of concrete structures | ||
| ARG.20 | Determination of flexural and compressive strength of "Grout" | NP EN 196-1:2006 e EN 12190:1998 | Mortar | ||
| ARG.21 | Determination of organic contaminators of aggregates by mortar method | EN 1744-1:2009 + A1:2012 (Section 15.3) | Mortar | ||
| ARG.22 | Determination of the composition of hardened mortars | Procedimento Interno ARG.22.IE.01 | Mortars | ||
| ARG.23 | Determination of flexural and compressive strength | EN 13892-2:2002 (EN 196-1:2016; EN 13892-1:2002; EN 13813:2002) | Screed material and floor screeds | ||
| ARG.24 | Determination “in situ” of rebound number of mortar | Internal procedure based on EN 12504-2:2021 | Mortar | ||
| BET.15 | Determination of compression strength | NP EN 445:2008 (section 4.6) | Injection grouts for prestressing tendons |