Itecons offers a wide range of accredited and non-accredited tests to perform in laboratory conditions or in situ, for the characterisation of materials used in construction works, in the development of new solutions for construction or for CE marking.
Reference | Designation/Description | Accredited assay |
Reference standards |
Product/ Material |
Comments |
---|---|---|---|---|---|
ACL.22 | Castor chair test of resilient and laminate floor coverings | EN 425 | Resilient and laminate floor coverings | ||
ACO.01 | Determination of deviation from nominal mass of steel for concrete reinforcement | ISO 15630-1:2019 (section 12) | Steel bars for concrete reinforcement | ||
ACO.02 | Determination of the geometric characteristics of steel bar reinforcements ribs for reinforced concrete | ISO 15630-1:2019 (sections 10 and 11) | Steel rebars for reinforced concrete reinforcement | ||
ACO.03 | Tensile test of steel bars for concrete reinforcement | ISO 15630-1:2019 (section 5); ISO 6892-1:2019 | Steel rebars for reinforced concrete reinforcement | ||
ACO.04 | Verification of the dimensions of steel bars of circular section for reinforced concrete | EN 10080 | Steel rebars for reinforced concrete reinforcement | ||
ACO.05 | Determination of mass per linear meter of steel prestressing bars | LNEC E 459 | Steel rods for prestressing | ||
ACO.06 | Determination of the cross-sectional area of steel wires and strands for prestressing | LNEC E 452, LNEC E 453 | Steel wires and strands for prestressing | ||
ACO.08 | Bending test of steel bars for concrete reinforcement | ISO 15630-1:2019 (section 6) | Steel bars for concrete reinforcement | Up to 12 mm diameter bars. | |
ACO.09 | Rebend test of steel bars for concrete reinforcement | ISO 15630-1:2019 (section 7) | Steel bars for concrete reinforcement | Up to 32 mm diameter bars. | |
ACO.10 | Tensile test of steel wires, cords and rods for prestressing | ISO 15630-3:2019 (section 5); ISO 6892-1:2019 | Prestressing steel wires, strands and bars | ||
ACO.11 | Shear test of electrowelded networks | ISO 15630-2:2019 (section 7.1) | Welded fabric | ||
ACO.12 | Tensile strength (Rm) of steel screws | ISO 898-1:2013 (Section 9.2) | Steel fasteners | ||
ACO.13 | Deformation of steel screws after application of a proof load | ISO 898-1:2013 (Section 9.6) | Steel bolts | ||
ACO.14 | Torsion test. Parameter: torque / force | EN 14399-2:2015 (Section 6.6.2) | Steel bolts | ||
ACO.16 | Determination of the straightness of steel wires, cords and rods for prestressing | EN ISO 15630-3 (ponto 13.3.4) | Fios, cordões e varões de aço para pré-esforço |