LABORATORY TESTS

Materials

Itecons offers a wide range of accredited and non-accredited tests to perform in laboratory conditions or in situ, for the characterisation of materials used in construction works, in the development of new solutions for construction or for CE marking.

Testing areas (15)
Reference Designation/Description Accredited
assay
Reference
standards
Product/
Material
Comments
ACL.22 Castor chair test of resilient and laminate floor coverings EN 425 Resilient and laminate floor coverings
ACO.01 Determination of deviation from nominal mass per metre of reinforcing bars of steel for the reinforcement of concrete ISO 15630-1:2010 (Section 12) Steel rebars for reinforced concrete reinforcement
ACO.02 Determination of the geometric characteristics of steel bar reinforcements ribs for reinforced concrete ISO 15630-1:2010 (Sections 10 e 11) Steel rebars for reinforced concrete reinforcement
ACO.03 Tensile test of steel bars reinforcements for reinforced concrete ISO 15630-1:2010 (Section 5), ISO 6892-1:2016 Steel rebars for reinforced concrete reinforcement
ACO.04 Verification of the dimensions of steel bars of circular section for reinforced concrete EN 10080 Steel rebars for reinforced concrete reinforcement
ACO.05 Determination of mass per linear meter of steel prestressing bars LNEC E 459 Steel rods for prestressing
ACO.06 Determination of the cross-sectional area of steel wires and strands for prestressing LNEC E 452, LNEC E 453 Steel wires and strands for prestressing
ACO.08 Bending test of steel reinforcement bars for reinforced concrete EN ISO 15630-1:2010 (Section 6) Steel rebars for reinforced concrete reinforcement
ACO.09 Rebending test of steel reinforcement bars for reinforced concrete EN ISO 15630-1:2010 (Section 7) Steel rebars for reinforced concrete reinforcement
ACO.10 Tensile test of steel wires, cords and rods for prestressing ISO 15630-3:2010 (Section 5), ISO 6892-1:2016 Steel wires and strands for prestressing
ACO.11 Shear test of welded fabric ISO 15630-2:2010 (Section 7) Welded fabric
ACO.12 Tensile strength (Rm) of steel screws ISO 898-1:2013 (Section 9.2) Steel fasteners
ACO.13 Deformation of steel screws after application of a proof load ISO 898-1:2013 (Section 9.6) Steel fasteners
ACO.14 Torsion test. Parameter: torque / force EN 14399-2:2015 (Section 6.6.2) Steel fasteners
ACO.16 Determination of the straightness of steel wires, cords and rods for prestressing EN ISO 15630-3 (ponto 13.3.4) Fios, cordões e varões de aço para pré-esforço