Itecons offers a wide range of accredited and non-accredited tests to perform in laboratory conditions or in situ, for the characterisation of materials used in construction works, in the development of new solutions for construction or for CE marking.
Reference | Designation/Description | Accredited assay |
Reference standards |
Product/ Material |
Comments (Administrator) |
---|---|---|---|---|---|
SOL.02 | Compaction test (Proctor) | LNEC E 197:1966 | Soils, Aggregates | ||
SOL.03 | Determination of the CBR | LNEC E 198:1967* | Soils, Aggregates | The normative document indicated with * is void, and its tecnical validity is not in question. | |
SOL.04 | Determination of consistency limits - Liquidity and plasticity index | NP 143:1969 | Soils, Aggregates | ||
SOL.05 | Sand equivalent test | LNEC E 199:1967* | Soils, Aggregates | The normative document indicated with * is void, and its tecnical validity is not in question. | |
SOL.06 | Soil methylene blue test | NF P 94-068:1998 | Soil, Aggregate | ||
SOL.07 | "In situ" density and water content determination by Gamma-densimeter method | ASTM D6938-17ae | Soils, Aggregates | ||
SOL.08 | Determination of the water content | NP 84:1965 | Soils, Aggregates | ||
SOL.11 | Size distribution of soil particles by sedimentation | LNEC E 196:1966 | Soil, Aggregate | ||
SOL.12 | Determination of particle density | NP 83:1965 | Soils, Aggregates | ||
SOL.13 | Plate load test | NF P94-117-1:2000 and Mode Operatóire CT-2:1973 | Soils, Aggregates | ||
TES.05 | Resistance to cyclic compressive loading | Internal Procedure TES.05.IE.01 (versão 2 of July 2022) | Expanded clay lightweight aggregate (LWA) | ||
TES.07 | Metal core flatwise tensile test | EN 2243-4:2005 | Multilayer panel, honeycomb panel, adhesives, bonded assemblies | ||
TES.08 | Peeling test metal-core | EN 2243-3:2005 | Multilayer panel, honeycomb panel, adhesives, bonded assemblies | ||
TES.09 | Determination of tensile lap-shear strength of bonded assemblies | EN 1465:2009 | Multilayer panel, honeycomb panel, adhesives, bonded assemblies | ||
TES.10 | Mechanical fatigue strength of under-ballast mat | DIN 45673-5:2010-08 (section 6.2) | Under-ballast mat | Load step 1: 10 million cycles. Load step 2: 2.5 million cycles. |