| Reference | Designation/Description | Accredited assay |
Reference standards |
Product/ Material |
Comments (Administrator) |
|---|---|---|---|---|---|
| ETI.06 | Determination of water vapour transmission properties | EAD 040083-00-0404 of 2019 (section 2.2.9.1) | ETICS | ||
| ETI.07 | Determination of adhesion between the base layer and the insulation product | EAD 040083-00-0404 of 2019 (section 2.2.11.1) | ETICS | ||
| ETI.08 | Determination of adhesive strength between the glue and the support | EAD 040083-00-0404 of 2019 (section 2.2.11.2) | ETICS | ||
| ETI.09 | Determination of adhesive strength between the glue and the insulation product | EAD 040083-00-0404 of 2019 (section 2.2.11.3) | ETICS | ||
| ETI.10 | Determination of transverse displacement resistance of ETICS | ETAG 004 2013 section 5.1.4.2.1 | ETICS | ||
| ETI.11 | Determination of ETICS resistance to pull-through of fixings | ETAG 004 2013 section 5.1.4.3.1 | ETICS | ||
| ETI.12 | Determination of ETICS tensile strength by foam block | ETAG 004 2013 section 5.1.4.3.2 | ETICS | ||
| ETI.13 | Determination of wind resistance - Dynamic wind suction test | EAD 040083-00-0404 of 2019 (section 2.2.13.3) | ETICS | Range: up to 9 kPa | |
| ETI.14 | Determination of pull-through resistance of fixings from profiles of ETICS | ETAG 004 2013 section 5.4.4.1 | ETICS | ||
| ETI.15 | Determination of tensile strength of reinforced base coat of ETICS | ETAG 004 2013 section 5.5.4.1 | ETICS | ||
| ETI.16 | Determination of tensile strength of fiberglass reinforcement mesh of ETICS | ETAG 004 2013 section 5.6.7.1 | ETICS | ||
| ETI.17 | Evaluation of the minimum coating thickness of metal reinforcement mesh of ETICS | EN ISO 1460:2020; EN ISO 1641:2009; EN 10244-2:2009 | ETICS | ||
| ETI.18 | Determination of tensile strenght perpendicular to faces - wet conditions | EAD 040083-00-0404 of 2019 (section 2.2.14.2) | ETICS | ||
| ETI.19 | Determination of mass per unit area of reinforcement mesh | ETAG 004 2013 - C.3.1 | ETICS | ||
| ETI.20 | Determination of ash content of reinforcement mesh | ETAG 004 2013 - C.3.2 | ETICS |