Itecons offers a wide range of accredited and non-accredited tests to perform in laboratory conditions or in situ, for the characterisation of materials used in construction works, in the development of new solutions for construction or for CE marking.
| Reference | Designation/Description | Accredited assay |
Reference standards |
Product/ Material |
Comments (Administrator) |
|---|---|---|---|---|---|
| BET.13 | Determination of concrete shrinkage and expansion | LNEC E 398:1993 | Hardened concrete test pieces | ||
| BET.14 | Determination of concrete carbonation depth | Internal procedure based on EN 13295 standard | Hardened concrete test pieces | ||
| BET.15 | Determination of compression strength | NP EN 445:2008 (section 4.6) | Injection grouts for prestressing tendons | ||
| BET.16 | Fluidity test: cone method | NP EN 445:2008 (section 4.3.1) | Injection grouts for prestressing tendons | ||
| BET.17 | Wick-induced test: bleeding and volume change | NP EN 445:2008 (section 4.5) | Injection grouts for prestressing tendons | ||
| BET.18 | Determination of the energy absorption capacity of fiber-reinforced slab specimens | NP EN 14488-5 | Fiber-reinforced slab test pieces | ||
| BET.19 | Determination of the penetration depth of water under pressure in hardened concrete test pieces | NP EN 12390-8 | Hardened concrete test pieces | ||
| BET.20 | Determination of density, absorption and voids in hardened concrete | ASTM C642-21 | Concrete | ||
| BET.21 | Determination of the tensile strength by flexing of concrete with fibers | EN 14651:2005+A1:2007 | Hardened concrete | ||
| BET.22 | Determination of density of fresh concrete | ||||
| BET.23 | Determination of exudation and volumetric stability of injection grouts for prestressing reinforcement using the Inclined tube method | ||||
| BET.24 | Sampling for testing | EN 12350-1:2019 | Fresh concrete | ||
| BET.25 | Air content determination – Pressure methods - Pressure gauge | EN 206:2013+A2:2021; EN 12350-7:2019; EN 12350-7:2019/AC:2022 | Fresh concrete | ||
| BTM.00 | Bituminous mixtures and binders characterization - Other tests (standards EN, ASTM, LNEC…) | - | Bituminous mixtures | ||
| BTM.01 | Determination of binder content by ignition | EN 12697-39:2020 | Bituminous mixtures |