Itecons offers a wide range of accredited and non-accredited tests to perform in laboratory conditions or in situ, for the characterisation of materials used in construction works, in the development of new solutions for construction or for CE marking.
| Reference | Designation/Description | Accredited assay |
Reference standards |
Product/ Material |
Comments (Administrator) |
|---|---|---|---|---|---|
| BTM.02 | Determination of the dimensions | EN 12697-29:2020 | Bituminous mixtures | ||
| BTM.03.01 | Determination of dry bulk density | EN 12697-6:2020 (Method A) | Bituminous mixtures | ||
| BTM.03.02 | Determination of saturated surface dry (SSD) bulk density | EN 12697-6:2020 (Method B) | Bituminous mixtures | ||
| BTM.03.03 | Determination of sealed specimen bulk density | EN 12697-6:2020 (Method C) | Bituminous mixtures | ||
| BTM.03.04 | Determination of bulk density by dimensions | EN 12697-6:2020 (Method D) | Bituminous mixtures | ||
| BTM.04 | Determination of needle penetration | EN 1426:2015 | Bitumen and bituminous binders | ||
| BTM.05 | Determination of the softening point. Ring and ball method | EN 1427:2015 | Bitumen and bituminous binders | ||
| BTM.06 | Determination of the maximum density | EN 12697-5:2018 (Method A) | Bituminous mixtures | ||
| BTM.07 | Determination of the water sensitivity | EN 12697-12:2018 (Method A) | Bituminous mixtures | ||
| BTM.08 | Specimen preparation by impact compactor | EN 12697-30:2018 | Bituminous mixtures | ||
| BTM.09 | Marshall test | EN 12697-34:2020 | Bituminous mixtures | ||
| BTM.10.01 | Determination of soluble binder content - centrifuge extractor method | EN 12697-1:2020 (Annex B: B1.5 e B2.1) | Bituminous mixtures | ||
| BTM.10.02 | Determination of soluble binder content | EN 12697-1:2020 (Annex B: B1.7) | Bituminous mixtures | ||
| BTM.11 | Determination of solubility of bitumen and bituminous binders | EN 12592:2014 | Bitumen and bituminous binders | ||
| BTM.12 | Wheel tracking test | EN 12697-22:2020+A1:2023 (Method B) | Bituminous mixtures |