Determination of deviation from nominal mass
Temperature and humidity measurement of in situ
Air speed mesurement in situ
Surface temperature mesurement on construction elements
Temperature measurement within building solutions
Evaluation of airbourne particles (inside)
Carbon Dioxide (CO2) concentration determination and monitoring temperature and relative humidity
Carbon Monoxide (CO) concentration determination
Volatile organic compounds' (COV's) concentration determination
Formaldehyde (HCHO) concentration determination
Microbiological air control for bacterial and fungal evaluation
Evaluation of airbourne particles (outside)
Laboratory test: Measurement of airborne sound reduction index for Rw. Range: Rw ≤ 72 dB
Measurement of sound pressure levels. Annoyance response
Determination of the dynamic stiffness
Determination of the apparent density
Determination of thermal conductivity coefficient
Determination of the air permeability
Determination of water absorption - Capillarity test
Compressive strength test of specimens
Determination of dimensions
Determination of the tensile strength of ropes
Determination of resistance to fragmentation - Los Angeles method
Determination of particle size distribution of mortars by sieve analysis
Determination of binder content by ignition
Determination of resistance to ageing by thermal shock
Particle size analysis by wet sieving
Laboratory test: Measurement of sound absorption in a reverberation room
Laboratory test: Determination of impact sound insulation index, Ln,w. Range Ln,w ≥ 25 dB
Laboratory test: Measurement of impact sound insulation of roofs, roof/ceiling systems and skylights excited by artificial rainfall, LIA.
Laboratory measurement of the efectiveness of floor coverings in reducing impact sound transmission through concrete floors, ∆IIC
Laboratory measurement of the reduction of the transmitted impact noise by floor coverings ∆Lw. Range: ∆Lw ≤ 50 dB
Determination of airflow resistance
Laboratory measurement of airborne sound insulation, Dn,e,w
Laboratory measurement of flanking transmission for airborne sound between adjoining rooms, Dn,f,w
Laboratory measurement of flanking transmission for impact sound between adjoining rooms, Ln,f,w
Determination of sound absorption in an impedance tube - Transfer-function method.
Estimate of airborne sound insulation index of windows, Rw
Measurement of sound pressure levels. Determination of the average long-term exposure sound level.
Building acoustics: Measurement of airborne sound insulation between rooms and determination of the sound insulation index
Building acoustics: Measurement of airborne sound insulation of facades and facade elements and determination of the sound insulation index. Global loudspeaker method
Measurement of reverberation time. Interrupted noise method (Engineering Method)
Building acoustics: Measurement of impact sound insulation of floors and determination of the sound insulation index
Building acoustics: Measurement of sound pressure level from service equipment in buildings. Determination of the sound level of particular noise
Measurement of sound pressure levels. Determination of the equivalent sound level
Characterisation of anti-vibration mounts
Determination of the dynamic stiffness of materials used under floating floors in dwellings, subjected to creep
Determination of the length and width
Determination of squareness of thermal insulating products
Determination of freeze-thaw resistance of thermal insulating products
Determination of long term water absorption by diffusion - long term test
Determination of behaviour under point load
Determination of compression behaviour
Determination of long term water absorption by immersion - long term test
Determination of water vapour transmission properties
Determination of bending behaviour of thermal insulating products
Determination of shear behaviour
Determination of compressive creep of thermal insulating products
Determination of tensile strength perpendicular to faces
Determination of tensile strength parallel to faces of thermal insulating products
Conditioning to moisture equilibrium under specified temperature and humidity conditions of thermal insulating products
Determination of flatness of thermal insulating products
Determination of dimensional stability under specified temperature and humidity conditions
Determination of deformation under defined conditions of compression land temperature
Determination of thickness
Determination of short term water absorption by short term partial immersion
Determination of the thermal resistance and the thermal conductivity coefficient (Guarded Hot Plate)
Determination of porosity of building materials
Determination of freeze-thaw resistance of clay pavers
Determination of moisture content of agglomerated composition cork
Determination of the resistance of glued joints of cork decorative panels
Determination of hygroscopic sorption properties of building materials and products
Determination of water vapour transmission properties of building materials and products
Neutral salt spray (NSS) test
Pull-Off test for adhesion
Cross-cut test for paints and varnishes
Determination of water tightness
Determination of the resistance to wind load
Determination of the resistance to loading in the leaf plan
Determination of the resistance to static torsion
Determination of the operating forces
Determination of the impact resistance
Determination of the resistance to vertical load
Determination of the resistance to soft and heavy body impact for doors
Determinatio of the resistance to hard body impact for door leaves
Determination of the dimensional characteristics of door leaves
Determination of the general and local flatness of door leaves
Determination of resistance to repeated opening and closing
Determination of operating forces
Determination of the thermal transmittance of doors and windows by hot box method
Determination of the thermal transmittance of doors and windows
Determination of the air permeability of building components and building elements
Determination of the resistance to driving rain under pulsating air pressure
Determination of the wind load resistance - wind suction test
Thermographic inspection and qualitative assessment of building envelopes
Verification test of aerodynamic characteristics of ventilation devices
Water tightness test of ventilation devices
Determination of the operating forces of shutters and blinds
Determination of the wind load resistance of shutters
Static tests on balcony handrails - horizontal static force
Static tests on balcony handrails - vertical static force
Dynamic tests on balcony handrails - shock with hard body
Dynamic tests on balcony handrails - shock with soft body
Determination of impact resistance
Wind resistance cyclic test of curtain walling
Determination of water tightness - Resistance to hygrothermal cycles
Determination of water tightness - Freeze-thaw resistance
Determination of the impact resistance - Impact resistance witht hard body
Determination of the impact resistance of ETICS - Puncture resistance
Determination of adhesion between the base layer and the insulation product
Determination of adhesive strength between the glue and the support
Determination of adhesive strength between the glue and the insulation product
Determination of transverse displacement resistance of ETICS
Determination of tensile strength of mechanical fixing devices (pull-through test)
Determination of ETICS tensile strength by foam block
Determination of wind resistance - Dynamic wind suction test
Determination of pull-through resistance of fixings from profiles of ETICS
Determination of tensile strength of reinforced base coat of ETICS
Determination of tensile strength of fiberglass reinforcement mesh of ETICS
Evaluation of the minimum coating thickness of metal reinforcement mesh of ETICS
Determination of tensile strenght perpendicular to faces - wet conditions
Determination of the geometric characteristics of the ribs
Tensile test
Verification of the dimensions of steel bars of circular section for reinforced concrete
Determination of mass per linear meter of steel prestressing bars
Determination of the cross-sectional area of steel wires, strands and bars for prestressing
Bend test
Rebend test
Tensile test of prestressing steel wires, strands and bars
Shear test
Tensile test (Rm)
Deformation after application of a proof load
Torsion test. Parameter: rotation /force curve and torque / force
Extraction, examination and compression test
Evaluation of the strength of concrete in the structures - Non-destructive test: Determination of the sclerometric index
Determination of the compressive strength of hardened concrete specimens
Spreading table test
Slump test
Vebe test
Interpretation of results of identity tests on concrete test pieces
Determination of the tensile strength by compression of hardened concrete specimens
Determination of density
Determination of the modulus of elasticity in compression
Determination of the flexural strength of test specimens
Determination of concrete shrinkage and expansion
Determination of concrete carbonation depth
Fluidity test: cone method
Wick-induced test: bleeding and volume change
Determination of the energy absorption capacity of fiber-reinforced slab specimens
Determination of the penetration depth of water under pressure in hardened concrete test pieces
Determination of the flatness in masonry block faces
Determination of compressive strength
Determination of water absorption by capillarity
Determination of net dry density and gross dry density
Determination of moisture expansion of horizontally hollow brick masonry blocks
Determination of water absorption of ceramic bricks for masonry
Determination of the dimensional characteristics of concrete pave
Determination of the compressive strength
Determination of water absorption from concrete pave
Determination of the abrasion resistance
Determination of dimensional characteristics of concrete curbs
Determination of flexural strength of concrete curbs
Determination of water absorption from concrete curbs
Determination of abrasion resistance of concrete curbs
Determination of water absorption from concrete slabs
Determination of abrasion resistance of concrete slabs
Determination of the flexural strength of concrete slabs
Determination of the flexural strength of ceramic tiles
Determination of the resistance to diametrical compression
Leak test
Determination of water absorption in concrete pipes
Determination of the mechanical resistance by bending on two extreme supports
Determination of the shear strength of concrete beams
Determining the dimensions of concrete beams
Determination of prestressing of prestressed beams
Determination of the crushing strenght
Determination of resistance to vertical loads
Determination of concrete water absorption
Determination of circumferential stiffness of thermoplastic pipes
Determination of shrinkage by drying and expanding with moisture from concrete aggregate blocks and reconstituted stone blocks
Pedestal vertical load test of raised access floors
Load test on element of raised access floors
Permanent deformation test on element of raised access floors
Hard body impact test of raised access floors
Soft body impact test of raised access floors
Determination of the length of the panel sides of raised access floors
Determination of the squareness of the panel of raised access floors
Determination of the straightness of sides horizontal to the raised access floors
Determination of the thickness of panels of raised access floors
Determination of panel twist of raised access floors
Determination of the vertical warping of panels of raised access floors
Determination of the difference in height between perimeter trims and the surface of the panel of raised access floors
Determination of the peel resistance of raised access floors
Determination of particle size distribution. Sieving method
Assessment of fines - Sand equivalent test
Determination of particle shape - Flakiness index
Determination of the particle density of filler by pyknometer method
Determination of Shape index
Assessment of fines - Methylene blue test
Determination of density and water absorption
Determination of the water content by drying in a ventilated oven
Determination of particle size distribution of granulated cork by mechanical sieving
Determination of apparent bulk density of granulated cork
Determination of the resistance to wear (micro-Deval test)
Determination of the lenght of railway ballast
Determination of drying shrinkage
Determination of potencial presence of humus
Determination of water-soluble chloride salts using the Volhard method
Determination of water-soluble sulfates
Determination of total sulfur content
Determination of acid soluble sulfates
Determination of fulvo acid content
Determination of density (vibration method, filling method and shock method)
Determination of flexural and compressive strength
Determination of water vapour permeability
Determination of shrinkage
Determination of consistence of fresh mortar (by flow table)
Determination of dry bulk density in hardened conditions
Determination of adhesive strength of hardened rendering and plastering mortars on substrates (laboratory conditions)
Determination of adhesive strength by the pull-off in situ method
Determination of mechanical resistance: flexural strenght and compressive strength
Determination of open time
Determination of slip
Determination of transverse deformation
Determination of the dimensions
Determination of needle penetration
Determination of the softening point. Ring and ball method
Determination of the maximum density
Determination of the water sensitivity
Specimen preparation by impact compactor
Marshall test
Determination of solubility of bitumen and bituminous binders
Wheel tracking test (small size devices)
Bitumen recovery by rotary evaporator method
Determination of the thickness of a bituminous pavement - destructive measurement
Determination of the volumetric composition
Determination of apparent density and open porosity
Determination of water absorption at atmospheric pressure
Determination of flexural strength under constant moment
Determination of uniaxial compressive strength
Determination of flexural strenght under concentrated load
Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency);
Determination of the slip resistance by means of the pendulum tester
Determination of water absorption coefficient by capillary
Compaction test (Proctor)
Determination of the CBR
Determination of consistency limits - Liquidity and plasticity index
Sand equivalent test
Soil methylene blue test
"In situ" density and water content determination by Gamma-densimeter method
Determination of the water content
Size distribution of soil particles by sedimentation
Determination of particle density
Plate load test
Determination of the straightness of steel wires, strands and bars for prestressing
Determination of seam strength of resilient floor coverings
Determination of water tightness of the connection of adjacent drainage channels
Determination of water absorption from drainage channels
Determination of the mechanical resistance
Determination of resistance to humidity by condensation
Determination of linear compressive force of gasket and weatherstripping
Determination of gasket and weatherstripping deflection recovery
Determination of gasket and weatherstripping deflection recovery after accelerated ageing
Determination of the corrosion resistance of building hardware
Mechanically operated locks, latches and locking plates - Determination of the return force of latch bolt
Mechanically operated locks, latches and locking plates - Determination of the resistance to side load on latch bolt
Mechanically operated locks, latches and locking plates - Determination of the torque to operate deadbolt
Mechanically operated locks, latches and locking plates - Determination of the strength of normal latch action and stops
Mechanically operated locks, latches and locking plates - Determination of the torque resistance of Rim lock with lockable handle/knob
Mechanically operated locks, latches and locking plates - Determination of the durability of latch action
Mechanically operated locks, latches and locking plates - Determination of the durability of deadbolt mechanism
Mechanically operated locks, latches and locking plates - Determination of the durability of locking snib mechanism
Mechanically operated locks, latches and locking plates - Determination of the closing force
Mechanically operated locks, latches and locking plates - Operation at extremes of temperature
Mechanically operated locks, latches and locking plates - Determination of the torque resistance of knob or level handle on bored lock and latch sets
Mechanically operated locks, latches and locking plates - Determination of the torque resistance of knob or level handle on rim night latch
Mechanically operated locks, latches and locking plates - Determination of the resistance to side load on deadbolt
Mechanically operated locks, latches and locking plates - Determination of the resistance to drilling and side load on deadbolt
Mechanically operated locks, latches and locking plates - Determination of the deadbolt projection
Mechanically operated locks, latches and locking plates - Determination of the resistance to end load on deadbolt
Mechanically operated locks, latches and locking plates - Determination of the resistance to end load with drilling on deadbolt
Mechanically operated locks, latches and locking plates - Determination of the resistance to pulling off of hook/claw bolt
Mechanically operated locks, latches and locking plates - Determination of the resistance to disengaging of hook/claw bolt
Mechanically operated locks, latches and locking plates - Determination of the resistance to forcing of locating device in sliding door locks
Mechanically operated locks, latches and locking plates - Determination of the resistance to pulling off of knob on bored lock and latch set
Mechanically operated locks, latches and locking plates - Determination of the resistance to end load on box protected locking plate
Mechanically operated locks, latches and locking plates - Determination of the resistance to side load on locking plate
Mechanically operated locks, latches and locking plates - Determination of the resistance to pulling on locking plate
Mechanically operated locks, latches and locking plates - Determination of the resistance to lifting force on locking plate
Mechanically operated locks, latches and locking plates - Protection against removal from door
Mechanically operated locks, latches and locking plates - Determination of the strenght of key
Mechanically operated locks, latches and locking plates - Determination of manual locking of deadbolt
Mechanically operated locks, latches and locking plates - Determination of manual locking of deadbolt with intermediate locking positions
Mechanically operated locks, latches and locking plates - Determination of automatic locking of deadbolt
Mechanically operated locks, latches and locking plates - Determination of automatic locking of latch bolt
Mechanically operated locks, latches and locking plates - Determination of the torque to withdraw the latch bolt with key
Mechanically operated locks, latches and locking plates - Determination of the torque to withdraw the latch bolt with handle
Mechanically operated locks, latches and locking plates - Determination of the strenght of bolt actions
Mechanically operated locks, latches and locking plates - Determination of the minimum follower restoring torque
Mechanically operated locks, latches and locking plates - Assessment of detaining elements
Mechanically operated locks, latches and locking plates - Assessment of effective differs
Mechanically operated locks, latches and locking plates - Assessment of differing step heights on key
Mechanically operated locks, latches and locking plates - Assessment of non-interpassing of keys with just one interval differ
Mechanically operated locks, latches and locking plates - Assessment of coding protection
Determination of sound transmission loss in an impedance tube
Laboratory measurement of noise emitted by inlet valves used in water supply installations
Determination of methanol by gas chromatography
Evaluation of the influence of organic materials in water intended for human consumption due to migration
Determination of resistance of capillary absorption
Determination of adhesive strength by the pull-off method
Determination of restricted shrinkage and expansion
Determination of water-soluble chloride content
Determination of water absorption coefficient due to capillary action
Determination of modulus of elasticity in compression
Determination of the tensile strength by flexing of concrete with fibers
Axial force fatigue test
Deflected tensile test
Determination of initial measurements
Static load test
Cutting test
Durability test
Determination of the tensile strength and modulus of elasticity
Shock or impact test on notched Charpy specimen
Isothermal relaxation test
Determination of thermal conductivity coefficient of high thickness thermal insulating products
Determination of breaking load at dowel hole
Determination of resistance to salt crystallization
Determination of the dynamic stiffness - Laboratory measurement of transfer properties
Laboratory test: Determination of sound power level of noise sources using sound pressure - precision method for hemi-anechoic rooms
Determination of useful storage volume and heat loss
Residential space heating appliance
Acoustics - In situ determination of insertion loss of outdoor noise barriers
Laboratory test: Determination of sound power levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (hemi-anechoic chamber)
Laboratory measurement of airborne sound transmission loss, TL (only applicable to building facade specimens including walls, doors, windows, and combinations thereof)
Laboratory test: Determination of sound power level of noise using sound pressure - Survey method using an eveloping measurement surface over a reflecting plane (in a hemi-anechoic chamber)
Laboratory test: Determination of emission of sound pressure levels at a workstation and at other specified positions in an essentially free field over a reflecting plane, with negligible environmental corrections (hemi-anechoic chamber)
Castor chair test of resilient and laminate floor coverings
Castor chair test of resilient, textile and laminate floor coverings
Performance acceptance test of hydraulic pumps (fluid equated to water)
Determination of flow in open channel
Storage volume and heat loss determination of hot water tanks
Particle size analysis by laser difraction
Amount of coarse foreign matter in reclaimed asphalt
Amount of fine foreign matter in reclaimed asphalt
Determination of the gross heat of combustion
Non-combustibility test
Determination of a building product's propensity to undergo continuous smouldering
Test methods for performed expansion joint fillers for concrete construction (Nonextruding and resilient types)
Determination of thermal compatibility by thunder-shower cycling (thermal shock) of products and systems for the protection and repair of concrete structures
Determination of resistance to carbonation of products and systems for the protection and repair of concrete structures
Determination of overall thickness of resilient floor coverings
etermination of length, width and straightness of sheet of resilient floor coverings
DDetermination of mass per unit area of resilient floor coverings
Determination of flexibility and deflection of resilient floor coverings
Determination of tensile strength of resilient floor coverings
Report of fire classification of construction products and building elements
Tensile test of metals and metal alloys (parameters: Fm, Fpx%, ReH, Rpx%, Rm, A, Agt, A (manual), S0, Su, Z, E)
Fatigue test of steel rebars
Ceiling support tensile test
Determination of compression strength
Determination of density, absorption and voids in hardened concrete
Determination of density of fresh concrete
Determination of exudation and volumetric stability of injection grouts for prestressing reinforcement using the Inclined tube method
Determination of resistance to immersion in boiling water of high pressure decorative laminates
Aggregate characterization - Other tests (Standards EN, ASTM, LNEC…)
Determination of bulk density and void volume
Determination of the apparent (bulk) density of filler in kerosene
Determination of length-to-thickness ratio of aggregates for armourstone
Determination of particle density and water absorption of armourstone
Classification of recycled coarse aggregate constituents
Determination of the voids of dry compacted filler
Determination of percentage of crushed and broken surfaces in coarse aggregate particles
Mortar characterization - Other tests (standards EN, ASTM, LNEC…)
Determination of workable life and correction time of fresh mortar - Method A
Determination of workable life and correction time of fresh mortar - Method B
Determination of workable life and correction time of fresh mortar - Method C
Bituminous mixtures and binders characterization - Other tests (standards EN, ASTM, LNEC…)
Determination of dry bulk density
Determination of saturated surface dry (SSD) bulk density
Determination of sealed specimen bulk density
Determination of bulk density by dimensions
Determination of soluble binder content - centrifuge extractor method
Determination of soluble binder content
Cementitious binders and adhesives characterization - Other tests (standards EN, ASTM, LNEC…)
Determination of setting time
Determination of standard consistence
Determination of soundness
Determination of setting times of building lime
Determination of standard consistence of building lime
Determination of tensile adhesion strength - Initial adhesion strength
Determination of tensile adhesion strength - Tensile adhesion strength after water immersion
Determination of tensile adhesion strength - Tensile adhesion strength after heat ageing
Determination of tensile adhesion strength - Tension adhesion strength after freeze-thaw cycle
Determination of shear adhesion strength - Initial shear adhesion strenght
Determination of shear adhesion strength - Adhesion strength after water immersion
Determination of shear adhesion strength - Shear adhesion strength after heat ageing
Determination of shear adhesion strength - Adhesion at elevated temperature
Determination of shear adhesion strength - Initial shear adhesion strength
Determination of shear adhesion strength - Shear adhesion strength after water immersion
Determination of shear adhesion strength - Shear adhesion strength after thermal shock
Sampling, examination and preparation of ceramic tile adhesives
Natural stone and agglomerated stone characterization - Other tests (standards EN, ASTM, LNEC…)
Absorption and bulk specific gravity of dimension stone
Compressive strength of dimension stone
Flexural strength of dimension stone
Modulus of rupture of dimension stone
Determination of sound speed propagation
Determination of rupture energy
Soil characterization - Other tests (standards EN, ASTM, LNEC…)
Laboratory test: Acoustic intensimetry
Burglar resistance - Resistance determination test under static loading
Burglar resistance - Resistance determination test under dynamic loading
Burglar resistance - Determination of the resistance to manual burglary attempts
Determination of the air permeability of doors, windows and curtain walling
Determination of the water tightness of doors, windows and curtain walling under cyclic static air pressure difference
Determination of the wind load resistance of doors, windows and curtain walling
Determination of the performance of exterior windows, curtain walling, doors and impact protective systems impacted by missile(s) and exposed to cyclic pressure differentials
Determination of the water tightness of doors, windows and curtain walling under uniform static air pressure difference
Determination of mass per unit area of reinforcement mesh
Determination of ash content of reinforcement mesh
Determination of average mesh opening and number of filaments of reinforcement mesh
Determination of water absorption of ETICS - Capillarity test
Determination of water tightness of ETICS - Resistance to hygrothermal cycles
Determination of the impact resistance of ETICS - Resistance to hard body impact
Determination of water vapour transmission properties of ETICS
Determination of bond strength between base coat and insulation product of ETICS
Determination of bond strength between adhesive and substrate of ETICS
Determination of bond strength between adhesive and insulation product of ETICS
Determination of the resistance to wind load of ETICS - Dynamic wind uplift test
Determination of the thermal transmittance of curtain walling
Determination of the air permeability of industrial, commercial and garage doors and gates
Determination of the resistance to water penetration of industrial, commercial and garage doors and gates
Determination of the resistance to wind load of industrial, commercial and garage doors and gates
Determination of the mechanical durability of industrial, commercial and garage doors and gates
Determination of the thermal transmittance of industrial, commercial and garage doors and gates
Shear strength test of metal profiles with termal barrier
Determination of the burning behaviour using a radiant heat source
Determination of the slip resistance by means of the British pendulum tester
Electrical Safety
Electric safety
Determination of performance and energy consumption
Determination of acid insoluble ash content by gravimetry
Determination of As contents by optical emission spectrometry (ICP-OES)
Determination of Pb contents by optical emission spectrometry (ICP-OES)
Determination of alkali metals (lithium, sodium and potassium) and barium contents by optical emission spectrometry (ICP-OES)
Determination of fluoride content by ion chromatography
Determination of Mg contents by optical emission spectrometry (ICP-OES)
Determination of the water-soluble calcium hydroxide content by volumetry
Determination of the content of incineration loss at 800 ° C by gravimetry
Determination of the content of insoluble matter in hydrochloric acid by gravimetry
Determination of the content of water-soluble calcium oxide in a base incinerated by volumetry
Analysis by infrared spectrophotometry associated with attenuated total reflectance cell (ATR-FTIR)
Determination of dry residue content by gravimetry
Determination of pH value by potentiometry
Determination of alkali content by optical emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of water-soluble chlorides content by potentiometry
Determination of acid soluble chloride salts
Determination of lightweight contaminators
Determination of water-soluble constituents by assessing the total dissolved solids in the eluate obtained in the aggregate leaching process.
Determination of acid soluble sulfides
Evaluation of the behavior of an aggregate when subjected to the magnesium sulfate test (Test method: EN 1367-2: 2009)
Determination of electrical conductivity by electrometry of eluate
Determination of colour by molecular absorption spectrophotometry
Determination of polycyclic aromatic hydrocarbons (PAH) by high performance liquid chromatography (uHPLC)
Determination of pesticides by gas chromatography associated with mass spectrometry (GC-MS / MS TQ)
Determination of total dissolved solids (TDS) at 180 ° C by gravimetry
Determination of phosphate by molecular absorption spectrophotometry
Determination of pH value by potentiometry of eluate
Determination of oil and grease by infrared spectrophotometry
Determination of total hydrocarbons by infrared spectrophotometry
Determination of the phenol index by spectrophotometry of molecular absorption
Determination of anionic surfactants by spectrophotometry of molecular absorption
Determination of nitrites by spectrophotometry of molecular absorption
Determination of dissolved oxygen by volumetry
Determination of lead and zinc by optical emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of alkali (sodium and potassium) by optical emission spectrometry with inductively coupled plasma (ICP-OES)
Preliminary assessment of the presence of oils and fats, detergents, color, odour, suspended matter and organic matter
Determination of odour by dilutions method
Determination of chlorides, nitrates and sulfates by ion chromatography
Determination of phosphates by molecular absorption spectrophotometry
Determination of pH (acids) by potentiometry of eluate
Determination of sugars by molecular absorption spectrophotometry
Determination of pH by potentiometry
Determination of Al, Cr, Mn, FE, Cu, Zn, Cad, Ni and Pb by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of As, Se and Sn by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of Hg by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of di-(e-ethyl-hexyl) phthalate by gas chromatography associated with mass spectrometry (GC-MS)
Odour determination by the dilution method
Determination of electrical conductivity by electrometry
Totais cyanide determination by molecular absorption spectrophotometry
Determination of anions (fluoride, chloride, nitrate and sulfate) by ion chromatography
Ammonium determination by molecular absorption spectrophotometry
Determination of pesticides by gas chromatography associated with mass spectrometry (GC-MS/MS TQ)
Determination of free chlorine by photometry
Determination of sulfur by volumetry
Determination of total suspended solids (TSS) by gravimetry
Determination of total phosphorous by molecular absorption spectrophotometry
Determination of biochemical oxygen demand, BOD5
Determination of aldehydes by gas chromatography associated with mass spectrometry (GC-MS)
Determination of density at 20°C by the pycnometer method
Determination of dioxins and furans by gas chromatography associated with mass spectrometry (GC-MS/MS TQ)
Determination of semi-volatile organic compounds by gas chromatography associated with mass spectrometry (GC-MS/MS TQ)
Determination of tannins and lignins by spectrophotometry of molecular absorption
Determination of nonylphenols and octylphenols by gas chromatography associated with mass spectrometry (GC-MS)
Color determination by the dilution method
Determination of sulfite by volumetry
Determination of chemical oxygen demand by photometry
Determination of hexavalent chromium (VI) by spectrophotometry of molecular absorption
Determination of total nitrogen content by elementary analysis
Determination of total organic carbon (TOC) by combustion and infrared
Determination of aluminum, iron, boron, copper, manganese, zinc, barium, cadmium, total chromium, nickel, lead, calcium, magnesium, sodium and potassium by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of antimony and arsenic by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of mercury by inductively coupled plasma optical emission spectrometry (ICP-OES)
Total cyanide determination by molecular absorption spectrophotometry
Determination of sulfides by volumetry
Determination of carbonates and bicarbonates by potentiometry and elementary analysis
Determination total organic carbon (TOC) and dissolved organic carbon (DOC) by combustion and infrared
Determination of barium, cadmium, total chromium, nickel, lead, calcium, magnesium, sodium and potassium by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of colour by by molecular absorption spectrophotometry
Determination of bicarbonate and carbonate by volumetry
Determination of lead by optical emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of dissolved cations (lithium, calcium, magnesium, sodium, potassium and ammonium) by ion chromatography
Determination total organic carbon (TOC) by combustion and infrared
Determination of cadmium, total chromium, nickel, lead, calcium, magnesium and sodium by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of antimony, selenium and arsenic by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of selenium, antimony, arsenic, cadmium, chromium, lead, mercury and nickel by inductively coupled plasma mass spectrometry (ICP-MS)
Determination of odour and flavour by organoleptic evaluation
Determination of turbidity by nephelometry
Determination of hardness by calculation from calcium and magnesium contents
Determination of permanganate index by volumetry
Cyanide determination by molecular absorption spectrophotometry
Determination of fluoride, chloride, nitrate, sulfate and bromates by ion chromatography
Determination of acrylamide by liquid chromatography
Determination of urea-derived pesticides by liquid chromatography (uHPLC)
Determination of cations (calcium, magnesium, sodium, potassium and lithium) by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination iodeto by ion chromatography
Determination of total metals (Ag, Al, As, Ba, Be, Bi, Cd, Co, Cr, Cs, Cu, Hg, Mn, Mo, Nb, Ni, Pb, Rb, Sb, Se, Sn, Sr, U, V, W, Y, Zr) by inductively coupled plasma mass spectrometry (ICP-MS)
Determination of smell, color, appearance and deposit by organoleptic evaluation
Determination of free carbon dioxide by volumetry
Determination of silicate by calculation from silica and pH contents
Determination of thiosulfate by ion chromatography
Iron (II) determination by molecular absorption spectrophotometry
Iron (III) determination by calculation from total Fe and Fe2+ contents
Determination of anions (bromate, bromide, fluoride, chloride, nitrite, nitrate and sulfate) by ion chromatography
Determination of alkalinity, bicarbonate and carbonate by volumetry
Determination of dry residue at 180 ° C and 260 ° C by gravimetry
Determination of total sulfur and S2-, HS- and H2S species by calculation from sulfur content and pH value
Determination of silica by molecular absorption spectrophotometry
Determination of carbonate by calculation from alkalinity content and pH value
Determination of total carbon dioxide by calculation from the alkalinity content and the pH value
Phosphate determination by molecular absorption spectrophotometry
Determination of total organic carbon (COT) by combustion and infrared
Determination of cations (Ca, Mg and Na) by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of Se by inductively coupled plasma mass spectrometry (ICP-MS)
Determination of anions by ion chromatography
Determination of total metals: Cd, Cr, Ni, Pb, Hg, As, Sb and Se by ICP-MS
Assessment of the influence of organic materials in water intended for human consumption due to migracion - Determination of unsuspected organic substances by GC-MS
Assay determination by gas chromatography
Determination of related substances by gas chromatography
Determination of total lead (Pb), cadmium (Cd), mercury (Hg) and arsenic (As) by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of ethanol by gas chromatography
Determination of alkali content by optical emission spectrometry (ICP-OES)
Determination of metals (Na, K, Mg, Na) in liquid biofuels by optical emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of sulfated ash content by gravimetry
Determination of total contamination content by gravimetry
Determinação do teor de enxofre por espectrometria de fluorescência de raios-X dispersivo de comprimento de onda (WDXRF)
Determination of the acidity index by volumetry
Determination of the iodine index by volumetry
Determination of carbon, hydrogen and nitrogen content by elementary analysis
Determination of total chlorine and sulfur content by elementary analysis
Determinação de metais (As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V, Zn) em biocombustíveis sólidos por espectrometria de emissão atómica com plasma indutivamente acoplado (ICP-OES)
Determinação do teor de humidade em biocombustíveis sólidos por gravimentria
Determinação do teor de cinzas em biocombustíveis sólidos por gravimetria
Determinação da densidade de biocombustíveis sólidos
Determinação do poder calorífico (superior e inferior) de biocombustíveis sólidos
Determination of polychlorinated biphenyl compounds (PCB) by gas chromatography associated with mass spectrometry (GC-MS/MS TQ)
Determination of linear alkyl benzenesulfonates (LAS) by liquid chromatography (uHPLC)
Determination of di(2-ethylhexyl)phthalate (DEHP) by gas chromatography associated with mass spectrometry (GC-MS)
Determination of nonylphenols and ethoxylated nonylphenols (NPE) by gas chromatography associated with mass spectrometry (GC-MS)
Determination ofpolycyclic aromatic hydrocarbons (PAH) by gas chromatography associated with mass spectrometry (GC-MS/MS TQ)
Determination of metals (Al, P, Na, Mg, Mn and Si) by atomic emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of dry matter by gravimetry
Determination of loss on ignition by gravimetry
Determination of sulfate content by gravimetry
Determination of the chloride content by volumetry
Determination of residue insoluble in hydrochloric acid and sodium carbonate content by gravimetry
Determination of residue insoluble in hydrochloric acid and potassium hydroxide content by gravimetry
Determination of the sulfide content by volumetry
Determination of loss on ignition by gravimetry and elements in the form of oxides by X-ray fluorescence spectrometry
Determination of free calcium oxide
Determination of loss on ignition
Determination of sulfate content
Determination of chloride content
Determination of the neutralizing value by volumetry
Sample pass through 4 mm sieve
Determination of total calcium content by volumetry
Sample pass through 0.16 mm sieve
Determination of moisture content by gravimetry
Determination of dry matter content by gravimetry
Determination of organic matter content by gravimetry
Determination of ash content by gravimetry
Determination of total carbon content by calculation
Determination of particle size fractions: <25 mm, <20 mm, <10 mm and <5 mm by gravimetry
Determination of value pH by potenciometry
Determination of laboratory compacted bulk density by gravimetry
Determination of a quantity by gravimetry
Determination of total nitrogen by Dumas method
Determination of the degree of maturation (self-heating test)
Determination of the anthropogenic inert materials and stones> 5 mm contents by gravimetry
Determination of polycyclic aromatic hydrocarbons (PAH) (naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene, dibenzo[a,h]anthracene, benzo[ghi]perylene) by gas chromatography associated with mass spectrometry (GC-MS/MS)
Determination of acid herbicides by liquid chromatography
Determination of imidacloprid by liquid chromatography
Determination of chlorophenols by gas chromatography associated with mass spectrometry (GC-MS / MS TQ)
Determination of P, K, Ca, Mg, B, Cd, Pb, Cu, Cr, Hg, Ni e Zn contents by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of propylene glycol by gas chromatography
Determination of particle size by light scattering
Optical microscopy assay
Determination of total lead (Pb), cadmium (Cd), mercury (Hg), arsenic (As), nikel (Ni), cromium (Cr) and cobalt (Co) by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of ester and linolenic acid methyl ester contents
Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography
Determination of free and total glycerol and mono-, di-, triglyceride contents
Determination of As, Ba, Cd, Cr Total, Cu, Hg, Mo, Ni, Pb, Sb, Se e Zn by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of As, Sb e Se by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of dissolved organic carbon (COD) by combustion and infrared of eluate
Determination of total organic carbon (COT) by combustion and infrared of eluate
Determination of total dissolved solids (SDT) by gravimetry of eluate
Determination of mineral oil C10-C40 by gas chromatography (GC)
Determination of BTEX (benzene, toluene, ethylbenzene and xylenes) by gas chromatography associated with mass spectrometry (GC-MS) of eluate
Determination of PCB by gas chromatography associated with mass spectrometry (GC-MS/MS TQ)
Determination of chloride, nitrate and sulfate by ion chromatography
Determination of the phenol index by spectrophotometry of moecular absorption
Determination of sodium content by inductively coupled plasma optical emission spectrometry (ICP-OES)
Photometer verification in pH determination
Photometer verification in iron determination
Photometer verification in manganese determination
Photometer verification in aluminium determination
Photometer verification in alkalinity determination
Photometer verification in cianuric acid determination
Photometer verification in dioxide chlorine determination
Photometer verification in free chlorine determination
Photometer verification in total chlorine determination
Determination of residual solvents by gas chromatography
Determination of total nitrogen content by volumetry
Determination of heavy metals (Cd, Cu, Ni, Pb, Zn, Hg e Cr), phosphor and potassium contents by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determinação de teores de metais totais por espectrometria de emissão ótica com plasma indutivamente acoplado (ICP-OES)
Determination of volatile organic compounds (VOC) by gas chromatography (GC)
Determination of metals (Al, Ca, Mg, Mn and Si) by atomic emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of chloride by volumetry
Determination of metals (Al, Ca, K, Mn, Na, Si and Mg) by atomic emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of metals (Al, Mg, Mn and Si) by atomic emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
Determination of corrosion resistance
Determination of resistance of mould fungus
Release of hazardous substances
Evaluation of the presence of tar
Determination of resistance to staining of floors and ceramic tiles
Determination of chemical resistance of floors and ceramic tiles
Determination of the oxide magnesium content by volumetry
Determination of the oxide calcium content by volumetry
Determination of lime available content by volumetry
Determination of free water content by gravimetry
Determination of free calcium oxide and free magnesium oxide by volumetry
Evaluation of the release of volatile organic compounds (VOC) and semi-volatiles (SVOC) by the test chamber method and by gas chromatography associated with mass spectrometry (GC-MS)
Determination of formaldehyde and other carbonyl compounds by high performance liquid chromatography (uHPLC)
Influence of organic materials in water intended for human consumption due to migration - Determination of odour and flavour of water in pippings systems
Migration test to assess the influence of organic materials on the color and turbidity of water intended for human consumption
Enhancement of microbial growth (EMG) on migration waters
Determination of hydrochloric acid content by volumetry (main product)
Determination of iron content by molecular absorption spectrophotometry
Determination of Cd, Cr, Ni e Pb contents by optical emission spectrometry (ICP-OES)
Determination of As, Sb and Se contents by optical emission spectrometry (ICP-OES)
Determination of Hg content by optical emission spectrometry (ICP-OES)
Determination of insoluble residue in hydrochloric acid content by gravimetry
Determination of calcium carbonate content by volumetry
Determination of magnesium carbonate content by volumetry
Determination of majority and minority constituents by optical emission spectrometry (ICP-OES)
Determination of sodium chlorite content by volumetry (main product)
Determination of sodium chlorate content by ionic chromatography
Determination of sodium nitrate content by ionic chromatography
Determination of calcium carbonate content by gravimetry
Determination of the percentage of sample retained on the 0.60 mm and 0.09 mm sieve by gravimetry
Determination of water content by gravimetry
Determination of insoluble matter content by gravimetry
Determination of Si, Al, Fe and Mn contents by optical emission spectrometry (ICP-OES)
Determination of sodium hydroxide content - total alkalinity - by volumetry (main product)
Determination of sodium chloride content by volumetry
Determination of sodium carbonate content by volumetry
Determination of As, Cd, Cr, Hg, Ni, Pb, Sb e Se contents by optical emission spectrometry (ICP-OES)
Determination of available chlorine content by volumetry (main product)
Determination of sodium bromate content by ionic chromatography
Determination of the water-soluble calcium oxide content by volumetry
Determination of aluminium content by volumetry (main product)
Determination of free acidity content by volumetry
Determination of basicity content by volumetry
Determination of the pH value by potentiometry of eluate
Determination of Fe content by optical emission spectrometry (ICP-OES)
Determination of Be content by optical emission spectrometry (ICP-OES)
Determination of As, Sb e Se contents by optical emission spectrometry (ICP-OES)
Determination of organic matter content (550ºC) by gravimetry
Preparation of eluate of waste, sludges and soils, including determination of dry matter content in the waste and determination of pH and electrical conductivity in the eluate
Determination of the pH value by potentiometry
Determination of total organic carbon in residue, mud and sediment samples by combustion and infrared
Determination of C10 to C40 hydrocarbons by gas chromatography (GC)
Determination of heavy metals (Cd, Cu, Ni, Pb, Zn, Hg e Cr) contents by inductively coupled plasma optical emission spectrometry (ICP-OES)
Determination of nitric nitrogen (nitrate) content by ion chromatography
Determination of nitric nitrogen (nitrite) content by molecular absorption spectrophotometry
Determination of ammoniacal nitrogen content by molecular absorption spectrophotometry
Determination of the total soluble nitrogen content by combustion and oxidation with electrochemical detection
Determination of soluble phosphor content by molecular absorption spectrophotometry
Determination of the total nitrogen content by dry combustion (elementary analysis)
Determination of the content of acid-soluble sulphates by gravimetry
Determination of granulometry by the Bouyoucos method
Determination of total metals (arsenic, barium, beryllium, cadmium, lead, cobalt, copper, chromium, strontium, lithium, mercury, nickel, silver, titanium and zinc) by optical emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of exchange bases (calcium, magnesium, potassium and sodium) and cation exchange capacity by optical emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of extractable phosphor and potassium by optical emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of extractable magnesium by optical emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of iron, copper and manganese extractable by optical emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of extractable boron by optical emission spectrometry with inductively coupled plasma (ICP-OES)
Determination of organic carbon and total carbon content by combustion and infrared
Determination of oils and fats and total hydrocarbons in soil, mud and residue samples by infrared spectrophotometry
Determination of free chlorine and total chlorine by molecular absorption spectrophotometry or photometry
Formed Flapper Valve Accelerated Test
Determination of the air permeability of buildings - Fan pressurization method
Geological and Geotechnical Report
Surface Geological Recognition
Mechanical prospecting - Prospecting well
Mechanical prospecting - mechanical drilling
Geophysical prospecting - Seismic refraction profiles
Water level monitoring
Piezometers installation
Light weight deflectometer (LWD) tests
Low strain impact integrity testing of deep foundations
Integrity Testing of Deep Foundations - Ultrasonic Crosshole Testing
Mechanical prospecting - dynamic probing test
Determination of volatile organic compounds (benzene, bromodichloromethane, dibromochloromethane, 1,2 - dichloroethene, tetrachloroethene, bromoform, trichloroethene and chloroform) by gas chromatography associated with mass spectrometry (GC-MS)
Determination of volatile organic compounds (VOC) by gas chromatography associated with mass spectrometry (GC-MS)
Determination of polycyclic aromatic hydrocarbons (PAH) [benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, benzo(g,h,i)perylene e indeno[1,2,3-cd]pyrene] by gas chromatography associated with mass spectrometry (GC-MS / MS)
Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography associated with mass spectrometry (GC-MS/MS TQ)
Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography associated with mass spectrometry (GC-MS / MS TQ)
Determination of organic contaminators of aggregates by mortar method
Determination of flexural and compressive strength of "Grout"
Influence of organic materials in water intended for human consumption –Organoleptic assessment of water in storage systems
Hydraulic tests: Measurement of depth of water seal, determination of flush volume(s) of the flushing cistern and leaktightness between flushing cistern and bowl
Hydraulic tests: Determination of flush volume(s) and, outlet valve leaktightness test
Determination of hiding power in paints and varnishes
Packaging classification
Determination of residual solvents (ethanol) by gas chromatography
Determination of the composition of hardened mortars
Determination of the dry density and water content - Proctor compaction test
Determination of California bearing ratio (CBR), immediate bearing index and the linear swelling
Abrasion resistance
Measurement of the geometrical characteristics
Tensile test (elongation after fracture, total extension at maximum force, maximum force, upper yield strength and tensile strength)
Sampling for testing
Laboratory mixing of bituminous mixtures
Determination of the sound power level
Determination of aggressive carbon dioxide content
Determination of pozzolanicity in cements
Resistance to cyclic compressive loading
Evaluation of impulsive vibrations in structures, buildings and quarries
Determination of the sound power level of noise using sound pressure - Survey method using an eveloping measurement surface over a reflecting plane
Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment
Recovery by evaporation of binder
Stabilization after recovery by evaporation of binder
Determination of sound power levels of noise sources using sound pressure - Engineering Method
Determination “in situ” of rebound number of mortar
Shore D hardness measurement (10 to 100 Shore D)
Determination of moisture content and dry matter by gravimetry of waste, sludges and soils
Determination of total metals: Ba, Cu, Cr, Mo and Zn by ICP-OES
Performance tests
Metal core flatwise tensile test
Determination of tensile lap-shear strength of bonded assemblies
Peeling test metal-core
Bend test on welded intersection
Air content determination – Pressure methods - Pressure gauge
Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
Methods of measurement of airborne noise that shall be used for the determination of the measured A-weighted sound power levels of UA classes 1, 2, 3, 5 and 6
Requirements, test methods and performance criteria for fire alarm sounders in a fixed installation
Determination of the thermal transmittance
Determination of the tensile strenght and tenacity
Determination of binder drainage of bituminous mixtures – Beaker method
Determination of harmful ballast elements
Laboratory measurement of impact sound transmission through floor-ceilling assemblies using the tapping machine, IIC
Determination of particle size distribution of armourstone
Hydraulic characteristics - Determination of flow rate
Determination of frost resistance
Determination of Ag, Ba, Be, Co, Cu, Cr, Mo, V and Zn in soils
Determination of the secant modulus of elasticity to compression
Laboratory measurement of footstep noise on floors
Vickers hardness test - HV5 to HV10
Determination of polycyclic aromatic hydrocarbons (PAH) in soils by gas chromatography associated with mass spectrometry (GC-MS/MS)
Determination of total alkalinity by titration of sodium hydroxide
Verification of post-installed anchors
Measurement of slip/skid resistance by the pendulum test method
Test methods for the qualification of free-field environments
Structural design
Determination of resistance to fixing (dowel hole) of agglomerated stone
Generic procedure for evaluating the directivity of a sound source
Sound-scattering properties of surfaces – Measurement of the random-incidence scattering coefficient in a reverberation room
Sound-scattering properties of surfaces – Measurement of the directional diffusion coefficient in a free field
Measurement of the impulse response
Determination of impurities A and B by gas chromatography
Determination of diethylene glycol and ethylene glycol by gas chromatography
Dosage by gas chromatography
Determination of residual solvents (dichloromethane) by gas chromatography
Determination of toluene by gas chromatography
Determination of volatile impurities by gas chromatography
Determination of benzocaine, chlorobutanol and p-dichlorobenzene by gas chromatography
Determination of content and related substances by gas chromatography
Determination of ethylene oxide and dioxane by gas chromatography
Determination of fatty acid composition by gas chromatography
Determination of impurity A and related substances by gas chromatography
Ignitability test
Single burning item (SBI) test
Determination of dissolved metals: Al, Cu, Fe, Mn and Zn by ICP-OES
Determination of total metals: Al, Cu, Fe, Mn, Zn and B by ICP-OES
Determination of total metals: Fe, Zn and B by ICP-OES
Determination of total metals: Ca, Mg and Na by ICP-OES
Determination of the affinity between aggregate and bitumen in bituminous mixtures – rolling bottle method
Determination of tensile strength of polypropylene thermal bases
Mechanical fatigue strength of under-ballast mat
Water resistance of under-ballast mat
Freeze-thaw resistance test de under-ballast mat
Ageing resistance of under-ballast mat
Methods for calculating loudness – Part 1: Zwicker method
Psychoacoustic metrics for ITT equipment (tonality)
Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
Mechanical resistance and stability tests; Performance tests; Safety tests (Residential solid fuel burning appliance room heaters, mechanically fed, fired by wood pellets; inset appliances and cookers (except appliances with shared chimney)
Mechanical resistance and stability tests; Performance tests; Safety tests (Residential solid fuel appliance room heaters, except appliances with shared chimney)
Mechanical resistance and stability tests; Performance tests; Safety tests (Residential solid fuel burning appliances, inset appliances including open fires, except for Kachelofen and Putzofen appliances and appliances with shared chimney)
Determination of available chlorine by redox volumetry in sodium hypochlorite
Determination of aluminium content by volumetry in aluminium-based coagulants
Determination of haloacetic acids (HAA) (dichloroacetic acid, monochloroacetic acid, monobromoacetic acid, dibromoacetic acid, trichloroacetic acid) by liquid chromatography associated with high-resolution mass spectrometry (LC-MS qTOF)
Determination of the air permeability of buildings - Fan pressurization method (Passive House)
Determination of film thickness
Determination of microbial growth in water due to migration
Determination of particle size distribution
Determination of thermal transmittance of building elements
Sum of the compounds Benzo(b)fluoranthene and Benzo(k)fluoranthene Calculation
Sum of the compounds 1-methylnaphthalene e 2-methylnaphthalene Calculation
Determination of the fragmentability coefficient of rock materials
Determination of the degradability coefficient of rock materials
Itecons performs diagnostic and analysis of pathologies in buildings, infrastructures and nonbuilding structures. These studies include the definition of corrective measures in failured buildings and defective constructions.
Itecons develops expert technical reports of accidents and pathologies which may occur during construction or after construction works are finished.
Evaluation of the structural safety of constructions.
At Itecons we carry out the monitoring of existing constructions (buildings, infrastructures, nonbuilding structures, etc.), including the identification of pre-existing problems in the areas surrounding construction sites.
Itecons takes part in arbitration for the resolution of disputes arising from insolvency proceedings or contracts resulting from these same procedures (Article 476 of the CCP).
Itecons offers services in total or partial project design review. Solutions for design optimisation are identified if needed.
Itecons offers services in construction management, such as technical support, monitoring and supervision, and quality control.
Collaboration and technical support in the preparation of special architecture and speciality projects
Technical expert analysis aimed at verifying the conformity of the construction with the project design.
Itecons has technicians with the necessary qualifications for the development of dynamic simulation models and issuing Energy Certificates of buildings (housing and services/trade).
The identification of improvement actions in buildings aims at increasing the thermal comfort and energy performance and the reduction of the probability of occurrence of pathologies.
Itecons carries out energy audits of buildings, from which it is possible to disaggregate energy consumption by function, thus allowing to create strategies to reduce energy bills.
Itecons performs indoor air quality audits to ensure correct air ventilation and renewal, which is essential for safeguarding healthy spaces and minimizing adverse effects on health.
Support for the compliance with legal obligations, such as the registration of waste maps (MIRR) and Pollutant Emissions and Transfers (PRTR).
STAmP is a voluntary document that bears the Itecons seal. It concerns important aspects of the performance of the assessed product/system.
Itecons supports manufacturers in the implementation of Factory Production Control for construction products, following the requirements of the Construction Products Regulation (Regulation (EU) No 305/2011).
Itecons offers commissioning services, i.e. ensuring that the systems and components of a building are designed, installed, tested, operated and maintained according with the needs and operational requirements of the owner.
Itecons provides water efficiency audits to private and public buildings (hospitals, swimming pools, hotels, industrial buildings, stadiums, shopping centers, etc.).
Turn your 2D ideas and products into 3D digital prototypes, facilitating the transition from 2D design and development processes to Industry's 3D processes.
Evaluate performance, improve quality and optimize your product by establishing real-world scenarios for a wide range of mechanical parameters (static and dynamic demands, vibration frequencies, fatigue, buckling, thermal behavior, etc.).
Interact with CAD information for your products in real-world environments by creating photo-quality images, videos, and 3D interactive content, and more effectively communicate your product's most complex details.
Itecons provides services in Environmental Impact Assessment (EIA), Appropriate Assessment (EA) and Strategic Environmental Assessment (SEA).
Consultancy in the Environmental Unified License, Environmental License - Industrial Emissions, Industrial License, and Environmental Management.
Itecons performs geological and geotechnical studies.
Itecons provides water efficiency classification services for buildings (AQUA+ systems) and sanitary products (Unified Water Label).
Itecons carries out different specialized consultancy work for the identification, promotion and selection of integrated and sustainable solutions throughout the water cycle.
Itecons develops optimized solutions for rainwater harvesting and greywater reuse.
Itecons develops noise maps for the modelling of the outdoor sound environment, for existing or future situations.
Development of architecture and speciality projects associated with urban operations, buildings and complementary work.
Itecons provides environmental consultancy services based on the Life Cycle Assessment methodology, according to EN ISO 14040 and EN ISO 14044.
Itecons develops Environmental Product Declarations (EPDs), based on Life Cycle Assessment (LCA) studies, according to EN 15804, ISO 14025, ISO 21930, among other standards.
Itecons provides Product Environmental Footprint (PEF) calculation services, based on Life Cycle Assessment (LCA) principles.
Itecons provides Product Carbon Footprint quantification services based on the ISO 14067 and GHG Protocol standards.
Itecons quantifies the Carbon Footprint of Organisations based on the GHG Protocol and ISO 14064-1 standards.
Itecons provides support services for the circular economy classification of organisations and has technical staff qualified to carry out audits as well as management under the eCIRCULAR system.
In order to demonstrate that the construction product meets the community harmonization legislati...
THERMINNOV; THERMINNOV CORK
KARTHERM
Expanded Cork Granulate
Smartbloc System 1; Smartbloc System 2
LSF structural panels
BARBOTHERM EPS; BARBOTHERM ICB; BARBOTHERM F EPS; BARBOTHERM F MW
Liz Kapoto
PRIMETHERM EPS; PRIMETHERM ICB
CDM-MTX-25/7
ISOVIT Cork Wood
ITS (Insulated Timber System)
Feltro Termofixado - IsoFelt
DuraBale – Rice straw building systems
SINUSPROTECT MGSI® ALPHA MGSI® M-MGSI®
U38/AcoustiCork U38
NEUCETHERM EPS NEUCETHERM CORK
FIXIN
DAMTEC® itapur
MUTE
U36/Acousticork U36
LECA® NUTROFERTIL GREEN ROOF D
SECOLITE® CEMENT BOARD
Chatron Solar Light Tube
FIBRAN® CEMNEXT
ISOPLAC CEM®
webertherm classic
DAMTEC color wave 3D
Stravifloor Mat-F3e Stravifloor Mat-F4.5e
Projoint Plus 4010 Projoint Plus 4010 DP2 Projoint Plus 3010 Projoint Plus 3010 DP2 Projoint ...
BC THERM
TFS (Timber-Frame System)
Cortex 0270 Class A1 Score’N’Snap Cement Board
SikaTherm Cork
Acousticork U34c
StrongJoint Simple Wave StrongJoint Two Wave StrongJoint Ajustável (10.8, 10.6, 6.6, 5.6 (inox)...
Projoint Plus S 50x05 DP1 Projoint Plus 4010 DP1
Neucetherm Mineral MW
LTS – Laminated Timber System
Painéis CLT – Cross Laminated Timber, marca Moodlam
webertherm comfort
Painel divisória Fractus
SikaTherm Classic
EAD 040007-00-1201 - Thermal Insulation Products for Buildings with Radiant Heat Reflective Compo...
EAD 040048-01-0502 - Rubber Fibre Mat to be Used for Impact Sound Insulation
EAD 040049-00-0502 - Polyurethane (PU) foam mat to be used for impact sound insulation
EAD 040089-00-0404 - ETICS with Renderings for the Use on Timber Frame Buildings
EAD 040288-00-1201 - Factory-made Thermal and Acoustic Insulations Made of Polyester Fibres
EAD 040369-00-1201 -Insulation Made of Loose-Fill or Compound Granulated Expanded Cork
EAD 040427-00-0404 - Kits for External Thermal Insulation Composite System (ETICS) With Mortar as...
EAD 090017-00-0404 - Point Supported Vertical Glazing
EAD 090020-00-0404 - Kits for External Wall Claddings made of agglomerated stone
EAD 090034-00-0404 - Kit Composed by Subframe and Fixings for Fastening Cladding and External Wal...
EAD 090062-00-0404 - Kits for External Wall Claddings Mechanically Fixed
EAD 160004-00-0301 - Post-Tensioning Systems for Prestressing of Structures
EAD 160027-00-0301 - Special Filling Products for Post-Tensioning Kits
EAD 200032-00-0602 - Prefabricated Tension Rod Systems with Special end Connectors
EAD 250005-00-0606 - Adhesive for Wall Cladding
EAD 330232-00-0601 - Mechanical Fasteners for Use in Concrete
EAD 330340-00-0606 - Factory Made Structural Anchor for Attaching Personal Fall Protection Equipm...
EAD 331924-00-0602 - Decking Fixing Assemblies
EAD 340006-00-0506 - Prefabricated Stair kits
EAD 350402-00-1106 - Reactive Coatings for Fire Protection of Steel Elements
EAD 350140-00-1106 - Renderings and Rendering Kits Intended for Fire Resistant Applications
EAD 350142-00-1106 - Fire Protective Board, Slab and Mat Products and Kits
EAD 210005-00-0505 - Internal Partition Kits
EAD 040083-00-0404 - External Thermal Insulation Composite Systems (ETICS) with renderings
EAD 030350-00-0402 - Liquid applied roof waterproofing kits
EAD 340308-00-0203 - Timber building kits
EAD 220089-00-0401 - Self Supporting Translucent Roof Kits
EAD 130186-00-0603 - Three dimensional nailing plates
EAD 040914-00-0404 - Veture kits – Prefabricated units for external wall insulation and their fix...
EAD 030352-00-0503 - Liquid applied watertight covering kits for wet room floors and/or walls
EAD 030436-00-0503 - Watertight covering kits based on flexible sheets for wet room floors and/or...
EAD 030437-00-0503 - Watertight covering kits based on inherently watertight boards for wet room ...
EAD 040313-00-1201 - In-situ formed loose fill thermal and/or acoustic insulation product made of...
Itecons conducts studies on the development and characterisation of materials and construction systems that aim to contribute to increasing the sustainability of buildings.
Itecons develops research work in the area of green roofs and facades aiming at the incorporation of natural and recycled materials and the creation of innovative solutions with improved environmental performance.
Procedures that imply the execution of precise and repetitive tasks require the use of mechanical and electromechanical systems. Itecons has the technical capacity and competence to develop this type of equipment.
Itecons conducts feasibility studies and energy production simulations from renewable sources, according to energy needs, physical characteristics of the building and the climatic conditions of the site where it is built.
The need to ensure repeatability, reproducibility and fluidity of manufacturing, testing or maintenance processes is increasingly important. Itecons has the capability and skills to sensitise and automate process controls.
Itecons develops theoretical and applied research in the area of chemistry and the environment, aiming at protecting resources, characterising and preserving environmental systems and developing new materials and solutions.
Itecons has a vast experience and proven technical capacity in the development of solutions in the area of hygrothermics, such as thermal insulation, window frames, exterior coatings, among other solutions.
Itecons uses high complexity numerical models that allow the simulation of physical phenomena using different techniques, namely finite elements, boundary elements, finite differences, non-mesh methods and virtual models.
Itecons carries out studies and develops tools that aim to guide the implementation of energy and water efficiency measures, meeting criteria of economic viability, environmental requirements and minimum regulatory requirements.
Itecons is involved in the implementation of strategies to achieve a more circular economy through the development of materials incorporating waste and solutions that allow the recovery of critical resources.
Itecons is involved in waste recovery through the development of innovative building materials, natural organic fertilisers, technical substrates, among others, with added value and high performance.
Itecons develops studies aimed at characterising the release of hazardous substances, biological resistance and the functional performance of new materials and systems, contributing to the creation of safer and more sustainable communities.
Itecons applies Life Cycle Assessment methodologies in order to develop products with lower environmental impact, identifying critical areas and stages and possible opportunities to improve the environmental profile.
Itecons has extensive experience and proven credentials in various areas of acoustics and noise and vibration control, serving as an ideal research partner for companies in the development of new solutions in these areas.
Itecons performs studies and develops tools to ensure that investment in energy efficiency measures is cost effective and that minimum requirements do not deviate too far from optimal levels of profitability.
The rehabilitation of the building is increasingly a necessity and obligation. To support industry professionals, Itecons conducts research focused on the creation of innovative and sustainable structural and non-structural rehabilitation solutions.
The catalogue gives ψ* values for a range of linear thermal bridging situations in buildings, for...
Pereira, A.; Tadeu, A.; Godinho, L.; Santiago, J.A.F.
Godinho, L.; Tadeu, A.
Godinho, L.; Branco, F. G.
Tapia, M.J.; Monteserín, M.; Burrows, H.D.; Almeida, J.A.S.; Pais, A. A.; Pina, P.; Seixas de Melo, J.S.; Jarmelo, S.; Estelrich, J.
Ramis, J.; Segovia, E.; Alba, J.; Carbajo, J.; Godinho, L.
Godinho, L.; Dias-da-Costa, D.; Júlio, E.; Areias, P.; Soares Jr., D.
Tadeu, A.; Stanak, P.; Sladek, J.; Sladek, V.; Prata, J.; Simões, N.
Godinho, L.; Dias-da-Costa, D.; Tadeu, A.; Soares Jr., D.
Tadeu, S.; Rodrigues, C.; Tadeu, A.; Freire, F.; Simões, N.
Tadeu, A.; António, J.
Serra, C.; Tadeu, A.; Simões, N.
Godinho, L.; Branco, F. G.; Amado Mendes, P.
Simões, N.; Simões, I.; Tadeu, A.; Vasconcellos, C.A.B.; Mandur, W.J.
Cruz-Muñoz, F.J.; Romero, A.; Tadeu, A.; Galvín, P.
Tadeu, A.; Chen, C.S.; António, J.; Simões, N.
Godinho, L.; Amado Mendes, P.; Pereira, A.
Romero, A.; Cruz-Muñoz, F.J.; Tadeu, A.; Galvín, P.
Godinho, L.; Amado Mendes, P.; Ramis, J.; Cardenas, W.; Carbajo, J.
Tadeu, S.; Tadeu, A.; Simões, N.; Gonçalves, M.; Prado, R.
Soares Jr., D.; Godinho, L.
Tadeu, A.; Prata, J.; Simões, N.
Tadeu, A.; Simões, N.; Simões, I.
Castro, I.; Tadeu, A.
Tadeu, A.; António, J.; Castro, I.
Tadeu, A.; Castro, I.
Tadeu, A.; Prata, J.; Simões, N
Costa, E.G.A.; Godinho, L.; Santiago, J.A.F.; Pereira A.; Dors, C.
Simões, I.; Simões, N.; Tadeu, A.; Reis, M.M.; Vasconcellos, C.A.B.; Mandur, W.J.
Vasconcellos, C.A.B.; Reis, M.M.; Mansur, W.J.; Tadeu, A.; Simões, N.; Simões, I.
Godinho, L.; Soares Jr., D.
Soares Jr., D.; Godinho, L.; Pereira, A.; Dors, C.
Simões, N.; Serra, C.
Prata, J.; Simões, N.; Tadeu, A.
António, J.; Moreira, A.; Tadeu, A.
Fino, R.; Tadeu, A.; Simões, N.
Cunha, S.; Aguiar, J.B.; Ferreira, V.M.; Tadeu, A.
Tadeu, A.; António, J.; Ferreira, P.
António, J.; Tadeu, A.; Ferreira, P.
Matias, G.; Faria, P.; Torres, I.
Tadeu, S.; Rodrigues, C.; Tadeu, A.; Simões, N.; Gonçalves, M.
Fino, R.; Simões,N.; Tadeu, A.
Martins, M. ; Godinho, L.; Picado-Santos, L.
Godinho, L.; Masgalos, R.; Pereira, A.; Branco, F.G.
Branco, F.G.; Godinho, L.
António, J.; Tadeu, A.; Castro, I.
Costa E.G.A.; Godinho, L.; Pereira, A.; Santiago, J.A.F.
Tadeu, A.; Simões, I.; Simões, N.; Prata, J.
Tadeu, A.; António, J.; Godinho, L.; Amado Mendes, P.
Tadeu, A.; Simões, I.; António, J.; Sousa, L.
Wang, F.; Chen, W.; Tadeu, A.; Correia, C.G.
Godinho, L.; Dors, C.; Soares Jr., D.; Amado Mendes, P.
Godinho, L.; Costa E.G.A.; Pereira, A.; Santiago, J.A.F.
Tadeu, A.; António, J.; Godinho, L.
Pereira, A.; Godinho, L.; Morais, L.
Torres, I.; Freitas, V.P.
Godinho, L.; Dias-da-Costa, D.
Tadeu, A.; Moreira, A.; António, J.; Simões, N.; Simões, I.
Simões, I.; Simões, N.; Tadeu, A.
Cunha, S.; Aguiar, J.B.; Tadeu, A.
Simões, N.; Tadeu, A.; António, J.; Mansur, W.
Škerget, L.; Tadeu, A.; Brebbia, C.A.
Ramis, J.; del Rey, R. ; Alba, J.; Godinho, L.; Carbajo, J.
Torres, I.
Romero, A.; Tadeu, A.; Galvin, P.; António, J.
Tadeu, A.; Stanak P.; António, J.; Sladek, J.; Sladek, V.
Godinho, L.; Costa E.G.A.; Santiago, J.A.F.; Pereira A.; Amado Mendes, P.
Tadeu, S.; Alexandre, R. F. ; Tadeu, A.; Henggeler Antunes, C.; Simões, N.; Pereira da Silva, P.
António, J.; Tadeu, A.; Marques, B.; Almeida, J.A.S.; Pinto, V.
Škerget, L.; Tadeu, A.
Škerget, L.; Tadeu, A.; Ravnik J.
Serra, C.; Tadeu A.; Simões, N.
Tadeu, A.; Stanak, P.; Sladek, J.; Sladek, V.
Rozeboom, H. J.; Godinho, L.; Nardini, M; Quax, W. J.; Dijkstra, B. W.
Dias, S.; Tadeu, A.; António, J.; Almeida, J.; Pedro, F.; Martins, S.; Serra, C.
Simões, I.; Tadeu, A.; Simões, N.
Tadeu, A.; Simões, N.; Simões, I.; Pedro, F.; Škerget, L.
Torres, I.; Veiga, R.; Freitas, V.P.
Moreira, A.; António, J.; Tadeu, A.
Stanak, P.; Tadeu, A.; Sladek, J.; Sladek, V.
Godinho, L.; Amado Mendes, P.; Tadeu, A
Tadeu, A.; Romero, A.; Stanak, P.; Sladek, J.; Sladek, V.; Galvin, P.; Antonio, J.
António, J.; Tadeu, A.
Romero, A.; Galvín, P.; António, J.; Domínguez, J.; Tadeu, A.
Tadeu, A.; Škerget, L.; Simões, N.; Fino, R.
Godinho, L.; Tadeu, A
Torres, I.; Matias, G.
Salehi, A.; Torres, I.
Simões, N.; Fino, R.; Tadeu, A.
López, O.L.; Torres, I.
Tadeu, A.; Simões, N.; Almeida, R.; Manuel, C.
Almeida, J.; Azevedo, A.; Brett, M.; Tadeu, A.; Silva-Afonso, A.; Costa, A.; Rufo, E.; Além, S.
Almeida, R.; Simões, N.; Tadeu, A.; Palha, P.; Almeida, J.
Cruz-Muñoz, F. J.; Romero, A.; Galvín, P.; Tadeu, A.
Tadeu, S.; Gonçalves, M.; Simões, N.; Costas, G.; Tadeu, A.
Romero, A.; Galvín, P.; Cámara-Molina, J. C.; Tadeu, A.
Cortês, A.; Almeida, J.; de Brito, J.; Tadeu, A.
Simões, N.
Simões, N.; Serra, C.; Macedo, H.
Almeida, J.; Santos, M.I.; Tadeu, A.; Rama, J.
Bandeira, F.; Ferreira, P.; Almeida, J.; Nascimento, A.; Nascimento, J.; Seabra Santos, F.
Torres, I.; Faria, P.; Matias, G.
Prata, J.; Gonçalves, M.; Simões, N.
Simões, I.; Simões, N.; Serra, C.; Gil, V.
Almeida, J.; Santos, M.I.; Tadeu, A.
Pedro, F.; António, J.; Rocha, G.; Alves, L.
Simões, N.; Fino, R.; Sousa, J.P.; Manuel, C.; Silva, L.
Guimarães, A.S. ; Delgado, J.; Barbosa, F.; Torres, I.; López, O.L.; Henriques, F.; Freitas,
Simões, N.; Gonçalves, M.; Simões, I.; Silva, L.; Pereira
Gil, A.; Simões, N.
Gomes, M.R.; Gameiro da Silva, M.; Simões, N.
Costa, J.; Bandeira, F.; Gil, A.; Simões, N.
Sousa. L.; Simões, N.; Gil, V.
Fino, R.; Simões, N.; Manuel, C.
Serra, C.; Simões, N.; Simões, I.; Tadeu, A.
Simões, N.; Prata, J.; Tadeu, A.
Simões, N.; Gonçalves, M.; Serra, C.; Tadeu, A.
Silva, R.; Brett, M.; Ferreira, A.D.; Serra, C.; Jesus, T.; Fino, M.; Tadeu, A.; Mendes, J.; Araújo, J.; Santos, R.
Marques, B.; Tadeu, A.; de Brito, J.; Almeida, J.
Marques, B.; Tadeu, A.; Almeida, J.; António, J.
Gonçalves, M.; Simões, N.; Serra, C.; Flores-Colen, I.
Cruz, P.; Costa, A.; Costa, V.; Pereira, M.; Rodrigues, L.; Rodrigues, C.; Lopes, A.; Rodrigues, C.; Freire, F.; Almeida, J.; Santos, I.; Azevedo, A.; Kanoun-Boulé, M.; Tadeu, A.; Além, S.; Rufo, E.; Martins, R.; Santos, N.
Marques, B.; Tadeu, A.; Almeida, J.; António, J.; de Brito, J.
Tadeu, S.; Gonçalves, M.; Simões, N.; Tadeu, A.
Zacchei, E.; Molina, J. L.
Marques, B.; Tadeu, A.; António, J.; Almeida, J.; de Brito, J.
Simões I.; Simões N.; Santos I.; Brett M.; Tadeu S.; Silva H.
Simões, N.; Almeida, R.; Tadeu, A.; Brett, M.; Almeida, J.
Santos, R. A.; Flores-Colen, I.; Simões, N.; Silvestre, J.D.
Carvalho, L.; Jorge, L.; Jerónimo, R.
Santos, M.; Coelho, A.S.; Paula, A.B.; Marto, C..; Amaro, I.; Saraiva, J.; Ferreira, M.M.; Antunes, P.; Carrilho, E.
Matias, G.; Torres, I.; Rei, F.; Gomes, F.
Romero, A.; Galvín, P.; Tadeu, A.
Marques, B.; António, J.; Almeida, J.; Tadeu, A.; De Brito, J.; Dias, S.; Pedro, F.; Sena, J. D.
Škerget, L.; Tadeu, A.; António, J.M.P.
Colacicco, A; Zacchei, E.
Zacchei, E.; Molina, J.L.
Zacchei, E.; Lyra, P. H.C.; Stucchi, F. R.
Resalati, S., Okoroafor, T., Henshall, P., Simões, N., Gonçalves, M., Alam, M.
Jacinto, C., C.; Lacerda, L., A.; Tadeu, A.
Silveira, D.; Gonçalves, A.; Flores-Colen, I.; Veiga, R.; Torres, I.; Travincas, R.
Gonçalves, M.; Simões, N.; Serra, C.; Flores-Colen I.
António, J.; Neves, A.; Nascimento, J.; Simões, N.; Serra, C.
Cortês, A.; Tadeu, A.; Santos, M.I.; De Brito, J.; Almeida, J.
Cortês, A.; Almeida, J.; Santos, M.I.; Tadeu, A.; De Brito, J.; Silva, C.M.
Simões, N.; Gonçalves, M.; Serra, C.; Resalati, S.
Saadatian, S.; Freire, F.; Simões, N.
Saadatian, S.; Simões, N.; Freire, F.
Torres, I.; Flores-Colen, I.; Silveira, D.; Travincas, R.; Matias, G.
Torres, I.; Matias, G.; Faria, P.
Marques, B.; Almeida, J.; Tadeu, A.; António, J.; Santos, M.I.; De Brito, J.; Oliveira, M.
Zacchei, E.; Nogueira, C.G.
Pessoa, S.; Guimarães, A.; Lucas, S.; Simões, N.
Oliveira, M.A.; Bragança, L.; Silva, S.M.; Paixão, D.; António, J.
António, J.; Bastos, G.; Almeida, J.; Tadeu, A.; Marques, B.; Marques, A.; Armesto, J.; Patiño-Barbeito, F.
Pimentel-Rodrigues, C.; Almeida, J.; Silva-Afonso, A.; Barreirinha, P.
Rodrigues, C.; Almeida, J.; Santos, M.I.; Costa, A.; Além, S.; Rufo, E.; Tadeu, A.; Freire, F.
Tadeu, A.; Škerget, L.; Almeida, J.; Simões, N.
Ramezani, B.; Gameiro da Silva, M.; Simões, N.
Simões, N.; Manaia, M.; Simões, I.
Škerget, L.; Tadeu, A.; Almeida, J.
Gonçalves, M.; Simões, N.; Serra, C.; Almeida, J.; Flores-Colen, I.; Castro, V. C.; Duarte, L.
Gonçalves, M.: Serra, C.; Simões, N.; Flores-Colen, I.; Kokolsky, C.; Sprengard, C.
Tadeu, A.; Marques da Silva, F.; Ramezani, B.; Romero, A.; Škerget, L.; Bandeira, F.
Ramezani, B.; Tadeu, A.; Jesus, T.; Brett, M.; Mendes, J.
Barrelas, J.; Dias, S. I.; Silva, A.; De Brito, J.; Flores-Colen, I.; Tadeu, A.
Dias, S.; Almeida, J.; Santos, B.; Humbert, P.; Tadeu, A.; António, J.; De Brito, J.; Pinhão, P.
Tadeu, A.; Romero, A.; Bandeira, F.; Pedro, F.; Dias, S.; Serra, M.; Brett, M.; Galvín, P.
Gonçalves, M.; Simões, N.; Serra, C.; Flores-Colen, I.; Rottenbacher, K.; Almeida, F. A.
Zacchei, E.; Bastidas-Arteaga, E.
Zacchei, E.; Tadeu, A.; Almeida, J.; Esteves, M.; Santos, M.I.; Silva, S.
Santos, L.; Cardoso, M. A.; Galvão, A. F.
Dias, S.; Tadeu, A.; Ramalho, A.; Brett, M.; Pedro, F.
Cortês, A.; Almeida, J.; Tadeu, A.; Ramezani, B.; Fino, M. R.; de Brito, J.; Silva, C. M.
Moghaddam, S.; Mattsson, M.; Ameen, A.; Akander, J.; Da Silva, M. G.; Simões, N.
Saadatian, S.; Rodrigues, C.; Freire, F.; Simões, N.
Zacchei, E.; Brasil, R.
Velázquez-Mata, R.; Romero, A.; Domínguez, J.; Tadeu, A.; Galvín, P.
Santos, L. F.; Cardoso, M. A.; Galvão, A. F.
Zacchei, E.; Lyra, P.H.C.; Lage, G.E.; Antonine, E.; Soares Jr., A.B.; Caruso, N.C.; de Assis, C.S.
Zacchei, E.; Nogueira, G.C.
Tadeu, A.; Romero, A.; Dias, S.; Pedro, F.; Brett, M.; Serra, M.; Galvín, P.; Bandeira, F.
Zacchei, E.; Lyra, P.H.C.
Travincas, R.; Bellei, P.; Torres, I.; Flores-Colen, I.; Matias, G.; Silveira, D.
Jacinto, C., C.; Tadeu, A.; Lacerda, L., A.
Dias, S.; Tadeu, A.; Almeida, J.; Humbert, P.; António, J.; de Brito, J.; Pinhão, P.
Simões, I.; Gil, A.
Zacchei, E.; Lyra, P.H.C.; Lage, G.E.; Antonine, E.; Soares Jr., A.B.; Caruso, N.C.; De Assis, C.S.
Travincas, R.; Pereira, Manuel F.C.; Torres, I.; Maurício, A.; Silveira, D.; Flores-Colen, I.
Bandeira, F.; Tadeu, A.
Tadeu, A.; Romero, A.; Dias, S.; Pedro, F.; Bandeira, F.; Serra, M.; Galvín, P.; Brett, M.
Santos, R.; Flores-Colen, I.; Simões, N.; Silvestre, J.
Amorim, M.; Peixoto de Freitas, V.; Torres, I.
Nyembwe, J. P.; Ogundiran, J.; Silva, M.; Simões, N.
Bellei, P.; Arromba, J.; Flores-Colen, I.; Veiga, R.; Torres, I.
Moura, R.; Bellei, P.; Torres, I.
Barrelas, J.; Silva, A.; De Brito, J.; Tadeu, A.
Nogueira, C.G.; Yoshio, L.; Zacchei, E.
Chordà-Monsonís, J.; Moliner, E.; Galvín, P.; Martínez-Rodrigo, M.D.; Zacchei, E.; Tadeu, A.; Ferraz, I.; Romero, A.
Gerardo, R.; P. de Lima, I.
Kikuchi, R.; Ferreira, C.; Gerardo, R.
António, J.; Tadeu, A.; Carrilho, J.
Nyembwe, J. P.; Ogundiran, J.; Chenari; B.; Simões, N.; Silva, M.
Dias, S.; Tadeu, A.; Almeida, J.; de Brito, J.
Zacchei, E.; Simões, N., Vieira, A., Esteves, M., Silva, H.
Travincas, R.; Torres, I.; Flores-Colen, I.; Francisco, M.; Bellei, P.
Galuppi, L.; Zacchei, E.
Moghaddam, S.; Simões, N.; Gameiro da Silva, M.
Bellei, P.; Torres, I.; Solstad, R.; Flores-Colen, I.
Zacchei, E.; Lizarazo-Marriaga, J.; García-Sánchez, F.; Tadeu, A.
Pessoa, S.; Jesus, M.; Guimarães, A.; Lucas, S.; Simões, N.
Moghaddam, S.; Serra, C.; Gameiro da Silva, M.; Simões, N.
Azevedo, A.; Almeida, J.; Gonçalves, M.; Simões, N.; Castro, N.; Santos, A.; Tadeu, A.
Jerónimo, R.; Gonçalves, M.; Furtado, C.; Rodrigues, K.; Ferreira, C.; Simões, N.
Bellei, P.; Magalhães, F.; Pereira, M.; Torres, I.; Solstad, R.; Flores-Colen, I.
Zacchei, E.; Esteves, M.; Azevedo, A.; Martins, S.; Almeida, J.; Tadeu, A.; Silva, S.
Colacicco, C.; Zacchei, E.
Soares, K.; Torres, I.; Flores-Colen, I.; Silveira, D.
Lopes, R.; Modarres, M.; Rodrigues, J.; Almeida, M.
Oliveira, A.; Silva, J.; Guiomar, N.; Fernandes, P.; Nereu, M.; Gaspar, J.; Lopes, R.; Rodrigues, J.
Lopes, R.; Rodrigues, J.; Correia, A.
Lopes, R.; Rodrigues, J.
Oliveira, A.; António, J.
Galuppi, L.; Zacchei, E.; Esteves, M.; Ferrão, J.; Simões, N.
Tadeu, A.; Carrilho, J.; Cortês, A.; Ferreira, F.; Almeida, J.
Nyembwe, J. P.; Munanga, J.; Simões, N.; Silva, M.
Travincas, R.; Silveira, D.; Bellei, P.; Gouveia, J.; Matias, G.; Torres, I.; Flores-Colen, I.
Gonçalves, M.; Freire, F.; Garcia, R.
Dias, L.; Marques, P.; Garcia, R.; de Santo, F.; Tentúgal, R.; Natal-da-Luz, T.; Sousa, A.; Sousa, J. P.; Freire, F.
Dias, S.; Almeida, J.; Tadeu, A.; de Brito, J.
de Paula, D.; Rodrigues, J.; Camargo, A.; Lopes, R.
Morgado, J.; Rosales, J.; De Brito, J.; Mendes, M. P.; Machini, B.; Bravo, M.
Travincas, R.; Mendes, M. P.; Torres, I.; Flores-Colen, I.
Oliveira, M.; Lee, P.J.; António, J.
Santos, B.; Machini, B.; Matias, G.; Moreira, N.; Portugal, P.; Torres, I.; Tadeu, A.; Almeida, J.
Coelho, K.; Almeida, J.; Castro, F.; Ribeiro, A.; Teixeira, T.; Palha, P.; Simões, N.
Vieira, J.; Cortês, A.; Santos, L.; Almeida, J.
Santos, R. A.; Simões, N.; Silvestre, J.D.; Flores-Colen, I.
Soares, K.; Torres, I.; Velosa, A.
Galuppi, L.; Zacchei, E.; Esteves, M.; Simões, N.
Simões, N.; Prata, J.; Garcia, R.; Santos, P.; Morais, B
Moghaddam, S.; Brett, M.; Silva, M.; Simões, N.
Simão, P.; Rodrigues, J.
Pessoa, S.; Lucas, S.; Simões, N.; Guimarães, A.
Moghaddam S.; Simões, N.; Brett, M.; Silva, M.; Prata, J.
Cortês, A.; Gonçalves, D.; Tadeu, A.; Almeida, J.
Silva, M.; Costa, M.; Velosa, A.; Torres, M.
Mouraz, C.; Silva, J.; Ferreira, T.
Romero, A; Velázquez-Mata, R.; Tadeu, A.; Galvín, P.
Velázquez-Mata, R.; Knuth, C.; Romero, A.; Squicciarini, G.; Tadeu, A.; Thompson D.J.; Galvín, P.
Santos, R.; Flores-Colen, I.; Simões, N.; Silvestre, J.; Solstad R.; Torres I.
Simões, N.; Moghaddam, S.; Gameiro da Silva, M.
Berardi,U.; António, J.; Simões, N.
Machini, B.; Simões, D.; Humbert, P.; António, J.; Almeida, J.
Calmeiro, M. R.
Calmeiro, M.R.
Arbat, G.; Gharsallah, O.; Cufí, S.; Ramírez de Cartagena, F.; Pinsach, J.; Romani, M.; Mira, C.; P. de Lima, I.; Gerardo, R.; Gonçalves, J.; Nunes, M.; Aboukheira, A.; Metwaly Shebl, S.; Enginsu, M.; Ünan, R.; Rienzner, M.; Facchi, A.
Ramezani, B.; Tadeu, A.; Ferreira, A.; Brett, M.; Pedro, F.; Simões, N.
Silva-Afonso, A.; Pimentel-Rodrigues, C.; Kanoun-Boulé, M.; Almeida, J.
Silva-Afonso, A.; Azevedo, A.; Almeida, J.; Kanoun-Boulé, M.; Pimentel-Rodrigues, C.; Tadeu, A.
Dias, S.; Tadeu, A.; António, J.; Pedro, F.; Serra, C.
Almeida, R.; Tadeu, A.; Simões, N.
Silva-Afonso, A.; Pimentel-Rodrigues, C.; Tadeu, A.; Almeida, R.; Simões, N.
Kanoun-Boulé, M.; Azevedo, A.; Santos, M.I.; Almeida, J.; Pimentel-Rodrigues, C.; Silva-Afonso, A.; Tadeu, A.
Almeida, J.; Azevedo, A.; Kanoun-Boulé, M.; Santos, M.I.; Tadeu, A.
Fino, R.; Simões, N.; Tadeu, A.
Fino, R.; Simões, N.; Tadeu, A
Simões, N.; Melo, L.; Serra, C.
Simões, N.; Serra, C.; Simões, I.
António, J.; Tadeu, A.; Sousa, L.; Almeida, R.; Tadeu, D.
Škerget, L.; Tadeu, A.; Ravnik, J.
Cortês, A.; Almeida J., Kanoun-Boulé, M.; Pimentel-Rodrigues, C.; Silva-Afonso, A.; Tadeu, A.
Pimentel-Rodrigues, C.; Silva-Afonso, A.; Lima, M.
Correia, C.G.; Tadeu, A.; Simões, N.
Cortês, A.; Almeida, J.; De Brito, J.; Tadeu, A.
António, J.; Tadeu, A.; Ângelo, M; Nascimento, J.; Tadeu, D.
Marques, B.; Tadeu, A.; Almeida, J; Rama, J.
António, J.; Nascimento, J.; Neves, A.
Simões, N.; Serra, C.; Tadeu, A.
Ferreira, A.; Thiis, T.
Pedro, F.; Dias, S.; Tadeu, A.; António, J.; López, O.; Coelho, A.
López, O.; Pedro, F.; Tadeu, A.; António, J.; Coelho, A.
António, J.; Tadeu, A.; Marques, B.; Almeida, J.
Ferrer, B.; António, J.; Bogas, J.; Simões, N.
Serra, C.; Simões, N.; Matos, S.; Miranda, N.; Pimentel-Rodrigues, C.; Silva-Afonso, A.
Ferreira, A. D.; Fino, R.; Thiis, T.; Lopes, A.M.G.; Sousa, A.C.M.
Matias, G.; Torre,s I.; Rei, F.; Gomes, F.
Silva, R.; Serra, C.; Brett, M.; Kanoun-Boulé, M.; Simões, N.; Tadeu, A.; Matos, S.; Miranda, N.
Silva, G.; Torres, I; Mendes da Silva, J.
Serra C.; Gonçalves M.; Simões N.; Flores-Colen, I.
Simões, N.; Tadeu, A.; Almeida, R.; Almeida, J.
Nascimento, A.; Martins, S.; Simões, N.; Manuel, C.
Teotónio, I.; Matos Silva, C.; Oliveira Cruz, C.; Simões, N.
Rito, F.; Simões, N.; Silva, E.; Prata, J.
Gonçalves, M.; Simões, N.; Serra, C.
Simões, N.; Almeida, R.; Tadeu, A.
Gonçalves, M.; Resalati, S; Maddock, S.; Sprengard, C.; Serra, C.; Simões N.
Simões, N.; Silva, L.; Sequeira, P.; Gonçalves, M.; Vieira, N.
Silva, L.; Simões, N.; Gonçalves, M.; Sequeira, P.; Pereira, V.
Tadeu, S.; Tadeu, A.; Simões, N.; Gonçalves, M.
Tadeu, S.; Simões, N.; Ribeiro, J.; Gonçalves, M.; Tadeu, A.
Torres, I.; Silveira, D.; Flores-Colen, I.; Travincas, R.; Matias, G.
Santos, R.A.; Flores-Colen, I.; Simões, N.; Silvestre, J.
Simoes, N.; Fino, R.; Prata, J.
Goncalves, M.; Simões, N.; Serra, C.; Flores-Colen, I.
Simões, I.; Simões, N.; Santos, I.; Brett, M.; Tadeu, S.; Silva, H.
Simões, N.; Goncalves, M.; Almeida, J.; Simões, I.; Azevedo, A.; Duarte, L.; Castro, N.
Tadeu, S.; Goncalves, M.; Simoes, N.; Tadeu, A.
Fino, R.; Skerget, L.; Tadeu, A.; Simões, N.
Serra, C.; Simões, N.; Coelho, K.; António, J.
Simões, N.; Nascimento, A.; Cantone, D.; Manigrasso, L.
Gonçalves, M.; Simões, N.; Serra, C.; Resalati, S.; Brown, K.
Resalati, S.; Brown, K.; Simões, N.; Gonçalves, M.; Serra, C.
Antunes, P.; Simões, N.
Santos, M.I.V.; Simões, N.A.V.; Tadeu, A.J.B.; Nascimento, A.
Marques, B.; Tadeu, A.; Almeida, J.; de Brito, J.
Marques, B.; Almeida, J.; de Brito, J., Tadeu, A.
Marques, B.; Tadeu, A.; Almeida, J.; Dias, S.; Pedro, F.
Cortês, A.S.B.; Almeida, J.A.S.; Kanoun-Boulé, M.; Tadeu, A.
António, J.; Coelho, A.; Tadeu, D.; Neves, A.; Dias, S.
Castro, I.; Neves, A.; António, J.; Tadeu A.;
Neves, A.; Castro, I.; António, J.; Tadeu, A.;
Silva,G., R.,T.; Torres, I., M.; Silva, J., M.;
Prata, J.; Simões, N.; Tadeu, A.;
Matias, G.; Torres, I.; Silva, P.; Silva, C.;
Torres, I.; Matias, G.;
Simões, N.; Gonçalves, M.; Serra, C.; Tadeu, A.;
Gonçalves, M.; Sequeira, P.; Silva, L.; Almeida, J.; Timmons, B., A.; Simões, N.;
Torres, I.; Matias, G., Paulo, D.;
Simões, N.; Fino, R.; Tadeu, A.;
Simões, N.; Coelho, D.; Martins, S.; Tadeu, A.;
Serra, C.; Simões, N.; Lourenço, J.;
Simões, N.; Salgado, N.; Castro, I.; Gil, A.; Manuel, C .;
Simões, N.; Tadeu, A.; Prata, J.; Castro, I.;
Simões, I.; Simões, N.; Tadeu, A.;
Prata, J.; Tadeu, A.; Simões, N.;
Serra, C.; Tadeu, A.; Prata, J.; Simões, N.;
Nascimento, A.; Simões, N.; Castro, I.; Nascimento, J.;
Carvalho, L.; Simões N.;
Tadeu, S.; Simões, N.; Tadeu, A.; Gonçalves, M.;
Gil, V.; Simões, N.; Prata, J.; Sousa, L.;
Simões, N.; Gonçalves, M.
Torres, I.; Flores-Colen, I.; Silveira, D.
Silveira, D.; Torres, I.; Flores-Colen, I.; Travincas, R.; Matias, G.
Rocha, C.S.; Alexandre, J.; Camocho, D.; Gonzalez, I.; Santos, M.
Almeida, J.A.S.; Santos, M.I.V.; Tadeu, A.J.B.; Rama, J.P.F.
Almeida, J.A.S.; Santos, M.I.V.; Tadeu, A.J.B.; Ferreira, V.; Fangueiro, R..
Torres, I.; Flores-Colen, I.
Gonçalves, M., Serra, C., Simões, N., Flores-Colen, I. Almeida, J.
Silva, R.; Serra, C.; Brett, M.; Boulé, M.; Simões, N.; Tadeu, A.; Matos, S.; Miranda, N.
Pessoa, S.; Guimarães, A.S.; Lucas, S.S.; Simões, N.
Travincas, R.; Silveira, D.; Flores-Colen, I.; Torres, I.; Matias, G.
Torres, I.; Flores-Colen, I.; Silveira, D.; Pinto, R.
Amorim, M.; Peixoto de Freitas, V.; Torres, I.; Kisilewicz, T.; Berardi, U.
Travincas, R.; Pereira, M.; Flores-Colen, I.; Maurício, A.; Torres, I.
Silveira, D.; Torres, I.; Flores-Colen, I.; Pinto, R.
Torres, I.; Flores-Colen, I.; Braz, J.
Pereira, M.; Flores-Colen, I.; Travincas, R.; Maurício, A.; Torres, I.
Amorim, M.; Freitas, P. V.; Torres, I.; Barbosa, C. F.
Carreira P et al
Simões, I.; Coelho, K.; Simões, N.; Botte, G.; Silva, H.
Fino, R.; Simões, N.; Simões, I.; Coelho, K.; Silva, H.
Simões, N.; Gonçalves, M.; Almeida, J.; Serra, C.; Castro, N.; Duarte, L.
Simões, N.; Vieira, N.; Prata, J.; Vieira, A.; Fino, R.
Antunes, P.V.; Santos, I.; Simões, N.; Serra, C.
Jerónimo, R.; Simões, N.; Roque, E.; Pires, C.; Rodrigues, K.; Ferreira, F.
Pessoa, S.; Jesus, M.; Guimarães, A.S.; Lucas, S.S.; Simões, N.
Gonçalves, M.; Simões, N.; Serra, C.; Flores-Colen, I.; Martins, S.
Serra, C.; Gonçalves, M.; Simões, N.; Flores-Colen, I.; Kokolsky, C.; Sprengard, C.
Almeida, J.; Škerget, L.; Tadeu, A.; Simões, N.
Prata, J.; Simões, N.; Silva, E.; Sanches, J.; Delca, R.; Silva, S.; Peixoto, C.
Zacchei, E.; Colacicco, A.
Silveira, D.; Soares, K.; Torres, I.; Flores-Colen I.; Travincas, R.
Torres, I.; Travincas, R.; Flores-Colen, I.; Belei, P.
Matias, G.; Torres, I.; Bellei, P.; Flores-Colen, I.; Silveira, D.; Travincas, R.
Bellei, P.; Torres, I.; Flores-Colen, I.; Travincas, R.; Silveira, D.
Travincas, R.; Torres, I.; Flores-Colen, I.; Mendes, M.; Silveira, D.
António, J.; Neves, A.; Ferreira, D.; Costa, I.; Marques, R.
Santos, L. F.; Cardoso, M. A.; Galvão, A.
Tadeu, A.; Ramezani, B.; Romero, A.; Bandeira, F.; Pedro, F.; Dias, S.; Serra, M.; Brett, M.; Skerget, L.; Galvín, P.
Resalati, S.; Okoroafor, T.; Henshall, P.; Simões, N.; Gonçalves, M.; Alam, M.
Simões, N.; Gonçalves, M.; Serra, C.
Dias Carrilho, J.; Ole, Fichte, L.; Almeida, T.; Rosu, G.; Paulo Coimbra, A.
Almeida, T.; Paulo Coimbra, A.; Medvedev, I.; Ole Fichte, L.; Dias Carrilho, J.
Dias Carrilho, J; Jesus, T.; Machini, B.; Pereira, R.; Almeida, J.; Tadeu, A.; Viegas, R.
Ranna, G.; Torres, I.; Silva, J.
Torres, I.; Matias, G.; Pinho, N.
Bellei, P.; Veloso, J.; Flores-Colen, I.; Mendes, M.; Pacheco, J.; Torres, I.; Solstad, R.
Soares, K.;Torres, I.; Flores-Colen, I.
Bellei, P.; Filho, F.; Flores-Colen, I.; Torres, I.
Travincas, R.; Bellei, P.; Torres, I.; Flores-Colen, I.
Travincas, R.; Mendes, M.; Flores-Colen, I.; Torres, I.; Bellei, P.
Bellei, P.; Veloso, J.; Flores-Colen, I.; Pacheco, J.; Mendes, M.; Torres, I.
Tadeu, A.; Dias, S.; Romero, A.; Galvín, P.; Bandeira, F.; Pedro, F.; Serra, M.; Ramezani, B.
Simões, N.; Gonçalves, M.; Serra, C.; Flores-Colen, I.
Dias, S.; Tadeu, A.; Almeida, J.; de Brito J.
António, J.; Dias, S.; Marques, B.; Tadeu, A.; Almeida, J.
Tadeu, A.; Dias, S.; Pedro, F.; Brett, M.
Ribeiro, J.; Serra, M.; Dias, S.; Tadeu, A.; Baptista, M.; Leal, R.; Matos, S.; Lemos, V.
Simões, I.; Simões, N.; Gil, A.; Coelho, C.; Silva, L.; Ferreira, P.; Sequeira, P.; Midão, M.; Rodrigues, J.; Ventura, S.; Afonso, A.; Silva, A.; Rodrigues, F.; Morgado, J.; Costa, L.
Gonçalves, M.; Simões, N.; Serra, C.; Resalati, S.; Sprengard, C.
Prata, J.; Abreu, L.; Guimarães, A.; Pessoa, S.; Pinto, A.; Simões, N.
Abrantes, J.; Vieira, J.; Santos, L.
Branco, F.; Correia, A. A.; Cerejeira, A.; Aniceto, M.; Morais, P. V.; Chung, A. P.; Peixoto, M.; Rodrigues, J.; Matias, G.; Torres, I.; Vieira, J.
Gerardo, R.; de Lima, I. P.; Vieira, J. ; de Lima, J. L. M. P.
Peixoto, M.; Rodrigues, J.; Marques, B.; Torres, I.; Vieira, J.; Morais, P. V.; Chung, A. P.; Aniceto, M.; Correia, A. A.; Branco, F.
Correia, A. A. S.; Cerejeira, A. R. M.; Branco, F. G.; Torres, I.; Matias, G.; Vieira, J.; Morais, P. V.; Chung, A. P.; Aniceto, M.; Peixoto, M.; Rodrigues, J.
Gerardo, R.; de Lima, I. P.
Paula, D.; Rodrigues, J.; Camargo, A.; Lopes, R.; Moreira, M.
Lopes, R.; Rodrigues, J.; Paula, D.; Camargo, A.
Paula, D.; Rodrigues, J.; Camargo, A.; Lopes, R.
Lopes, R.; Rodrigues, J.; Camargo, A.; Tadeu, A.
Vieira, F.; Almeida, M.; Rodrigues, J.; Lopes, R.
Lopes, R.; Rodrigues, J.; Tadeu, A.; Santos, C.
Lopes, R.; Rodrigues, J.; Correia, A.; Oliveira, R.
Gerardo, R.; Abrantes, J.; Vieira, J.
Cortês, A.; Almeida, J.; Tadeu, A.
Almeida, J.; Machini, B.; António, J.; Simões, D.; Humbert, P.
Machini, B.; Almeida, J.; António, J.; Simões, D.; Humbert, P.
Matias, G.; Santos, B.; Zeferino, C.; Almeida, J.; Tadeu, A.; Ávila e Sousa; J.
Santos, B.; Matias, G.; Almeida, J.; Tadeu, A.; Ávila e Souza, J.; Zeferino, C.
Moreira, C.; Rodrigues, C.; Paula, D.
Simões, I.; Simões, N.; Silva, L.; Ferreira, P.; Sequeira, P.; Midão, M.; Rodrigues, J.; Ventura, S.; Afonso, A.; Silva, A.; Costa, L.
Dias, S.; Tadeu, A.; Almeida, J.; António, J.; de Brito, J.
Paula, D. J.; Rodrigues, J.; Camargo, A.; Lopes, R.
Rocha, H.; Vilela, A.; Nascimento, A.; Paula, D.; Simões, N.; Antunes, P.
Simões, I.; Gil, A.; Parreira, A.; Simões, N.; Jerónimo, R.
Paula, D.; Rodrigues, J.; Camargo, A.
Santos, L.; Paula, D.; Scabbia, A.
Simões, N.; Prata, J.; Garcia, R.; Santos, P.; Morais, B.
Calmeiro, M.; Garcia, R.; Gonçalves, M.; Prata, J.; Simões, N.; Tadeu, A.
Santos, B.; Machini, B.; Matias, G.; Torres, I.; Tadeu, A,; Almeida, J.
Machini, B.; António, J.; Almeida, J.
Torres, I.; Ferreira, A.; Santana, R.
Shahpouri, F.; Tasnimi, A.; Tadeu, A.
Beugre, M.; Jesus, T.; Pedro, F.; Brett, M.; Tadeu, A.; Lopes, V.; Pinto, J.; Fidalgo, M.; Godinho, R.; Cruz, F.
Farinha, F.; Oliveira, M.; Matias, G.; Carmo, F.; Abrantes, J.; Vieira, J.
Farinha, F.; Oliveira, M.; Matias, G.; Abrantes, J.; Carmo, F.; Isidoro, J.; Lança, R.; Gerardo, R.; Vieira, J.
Rebelo, F.; Brett, M.; Figueiredo, A.; Vicente, R.; Simões, N.; Almeida, R.; Ferreira, V.
Paula, D.; Simões, N.; Nascimento, A.; Andrade, J.
Jerónimo, R.; Simões, N.; Gil, A.; Simões, I.; Portocarrero, M.
Machini, B.; Silva, L.; Serra, C.; Almeida, J.; Simões, N.
Matias, G.; Pinho, N.; Torres, I.
Salehi, M.; Calmeiro, M.; Andrade, J.; Tadeu, A.; Simões, N.
Dias, S.; Azevedo, A.; Santos, B.; Oliveira, M.; Almeida, J.; Tadeu, A.
Dias, S.; Pedro, F.; Morgado, P.; Ferreira, P.; Tadeu, A.; António, J.
Maria de Rosário Fino
Joana de Sousa Dias Prata
Catarina Serra
Sérgio Tadeu
Gina Maria Lourenço Matias
Eduardo Manuel Ferreira Almeida da Natividade de Jesus
Anabela Mendes Moreira
Igor André dos Santos e Castro
Maria Inês Vieira Simões
Maria de Lurdes Belgas da Costa Reis
Adriana Dias
Adriano Brito Lopes
Adriano do Carmo Fernandes Martins
Ana Catarina da Silva Azevedo
Ana Isabel Neves
Ana Margarida Moreira Raimundo
Ana Raquel Quinteiro
Ana Rita Simões Raposo
Ana Rute Oliveira Gonçalves
André Bernardino
André Massano Lucas Simão
Armando Ramos
Arnfried Cardoso Ziebell
Carlos Miguel Barreirinhas da Silva
Cátia Alexandra Graça Tavares
Cátia Micaela Antunes Marques
Cátia Monteiro
Cecília Antónia Pereira da Silva
David Miguel Freire Tadeu
Diana Sofia Sousa Teles
Diogo Miguel Pinto Pereira
Estrela Maria Pinto Simões
Fábio José Xavier Carvalho
Fernanda Daniela Cunha Dionísio
Filipa Cláudia Abrantes Martins
Flávio Pires Rito
Gina Matias
Hugo Filipe Pedrosa Alberto
Inês Miguel Macedo Abrantes da Silva Alves
Joana Riachos
Joana Rita Teixeira Bento
João Carlos Ferreira Seabra
João Carlos Monteiro Leitão Domingos Rebelo
João Samuel Ferreira Cação Ribeiro
José Manuel Seguro Lourenço
José Rui Bandeira Coimbra
Juliana R. Ferreira de Castro
Laura Raquel Lourenço de Sousa
Lídia Maria dos Santos Carvalho
Liliana Armanda Cortês de Sousa
Luís Carlos Pimentel Tavares
Luís Eduardo Reis Flórido de Melo
Margarida Morais Monteiro
Maria da Conceição Formoso Nobre Santos
Maria de Fátima Teixeira R. Gomes
Mariana Busano Pinto Ângelo
Nuno Gonçalo Salgueiro Trindade
Paulo Daniel Mendes Silva
Pedro Alexandre Lourenço Inácio
Pedro Couceiro Dias de Carvalho
Pedro Jorge Godinho Ferreira
Pedro José Cabral Abrantes
Rafael Samelo Cruz
Rafaela Vanessa Saraiva da Silva
Ricardo Fonseca Ceia
Ricardo Luís Moura Gomes de Paula
Rita Helena Januário Costa Santos
Rui Pedro Ribeiro Gonçalves
Samuel Nuno da Conceição Catarino do Pranto
Sara Andreia Couto Fonseca
Sául Martins
Serafim de Sousa Machado da Fonseca Pedroso
Sérgio Fernando Tadeu
Seyedeh Shiva Saadatian
Stephanie dos Santos Capelas
Tânia Pereira Moreira
Teresa Filipa Biscaia de Andrade Barbosa
Tiago da Silva Martins
Tiago Filipe Andias de Melo
Vera Lúcia Costa Araújo
Vítor Manuel Moreira Ferreira
Kevin Dias Costa
Paulo Portugal
Beatriz Rosa de Abreu Pereira Marques
Pedro Filipe Dias Veríssimo Albino
Maria de Fátima Rosa Pereira Areias
Bahareh Ramezani
Andreia Sofia Borges Cortês
Ricardo Alexandre Santos Almeida
Sara Maria Santos Soares Dias
Márcio Paulo Ferreira Gonçalves
João Pedro Marques Gouveia
Kátia Maria Pereira Soares
Diana Pereira Gonçalves
Diogo José da Silva Antunes Simões
Manuel João de Almeida Matos
Measures to adapt to climate change
Shared Waste Solutions
Platform for Energy Efficiency in Buildings
CE Marking of construction products
DigitAl Management
ENERGY AND WATER EFFICIENCY
GREEN ROOFS AND FAÇADES
ClimTestE+ aims to develop a new generation of climatic chambers incorporated with technologies and characteristics that make it a competitive product in the international market
The project aims to develop a new product, inserted in the area of ceramic elements, for the exterior cladding of a facade
Development of a multifunctional system integrates with cork and a photovoltaic system with hidden fixation points
The project aims for the development of a modular and multifunctional floating floor for the interior of intercity and regional railway transport
The project aims to develop and validate new green roof and facade systems
Plataform that supports the manufacturers of the construction sector in the process of CE marking their products
The main goal of this project is to develop innovative composite materials incorporating rice husk, rubber and cork waste in their composition
Concept and development of multifunctional panel for compartmentalisation systems and equipment encapsulation, with the incorporation of an innovative acoustic and thermal insulation core
Innovative toilet integrating multiple comfort, hygiene and sustainability functions
Concept and characterisation of green roofs and living facades built with structured systems using expanded natural cork
Innovative multi-functional Vacuum-Insulation-Panels (VIPs) for use in the building sector
Development of a metallic structure shading system that integrates green roofs, recovery of rainwater and the production of photovoltaic energy
Development of an innovative production technology with view on the industrialisation of a multifunctional modular stone wall system, consisting of the interconnection of modular panels and their attachment to the structure of buildings
Ecological and Functional Technical Mortars
The main goal of this project is to develop an innovative Secondary Substation
Promotion of energy and water efficiency in complex infrastructures
An essencial tool in the digitlization of an SME
Development of pallets with modular technology and a configurable structure
Evolution in Window Sliding System
New Generation High Performance Shells for Climatic Chambers
Development of eco-materials for green roofs
Recycled and Natural Materials and Products to develop nearly zero energy buildings with low carbon footprint
Compact instrumentation, control and automation systems for testing air conditioning and refrigeration equipment
Sustainable and design Burel products for new indoor applications with enhanced acoustic performance
Finaciamento Plurianual de Base (FITEC)
High performance thin rendering systems for application over thermal insulation mortars and external thermal insulation composite systems
Development of a sustainable thermal solution for aluminium frames using a cork based composite
Inov C 2020 - Innovation Ecosystem
Large dimension panoramic and movable intelligent skylight window for buildings
Passive evaporative cooling of facades using ICB
Experimental and Numerical Analysis of Interface mortar-support
Cementitious cork composites for improved thermal performance of pipelines for ultradeep waters
More volume, same technology
Long Span Modular Bridges: smarter, extensible, lighter and fast assembly
Design, development and final validation of new wooden and cement posts
Compósitos cimentícios com casca de arroz para soluções pré-fabricadas de painéis multicamada e barreiras acústicas
Adaptive Light Steel Frame Wall Panel for construction or renovation
Multi-Objective Building Retrofit, Simulation and Monitoring on-line optimization tool for Improving Energy Efficiency in Buildings
Dinamização da participação do ITeCons no Horizonte 2020
INNOVATIVE RAILWAY INTERIOR SYSTEMS
Mortars with high chemical resistance for application in sanitation systems
Development of a cabin for the confinement or protection of people in situations of high risk of contagion
REFORÇO DE COMPETÊNCIAS
Smart Roofs System: Advanced Roofs Waterproofing System
Platform for estimation, control and optimisation of wastewater treatment plants
Interdisciplinary Methodologies for Protecting Industrial Zones Against Forest Fires
PErsonAlised e-Business Coaching for Construction SMEs
Development of better practices and rules for constructions and surroundings in areas prone to wildland-urban interface fires
Innovative heated pools with reduced thermal losses and integration of SMART energy and water management systems
Innovative composites with powder incorporation resulting from limestone cutting sludge
Sustainable composites based on hydraulic binders and mineral wool residues
Development of innovative marquetry applications integrating new materials and industry 4.0 processes
FERROVIA 4.0
Integrated Outdoor Conversion Platform for the Interface controlled, coordinated and optimised for the network of renewable sources and storage
Design and development of modular houses with the possibility of adaptation to different levels of expansion and comfort
Large Spans Flooring Steel Grid
Super Energy Efficient Radiant Floor Systems
Thermal Blocks 3D Printing
Central Region’s Smart Innovation Ecosystem
Towards climate resilience from upcycle waste technologies for the construction industry - innovative concrete solutions
Specialization of SMEs in the design, construction and maintenance of green roofs and facades solutions
Artificial Intelligence on the Management of the Degree of Readiness in Urban Firefighting
SISTEMAS AVANÇADOS
Financiamento Plurianual de Base (PRR)
Regions for climate change resilience through Innovation, Science and Technology
Valorization of Natural Stone for a digital, sustainable and qualified future
MODULAR SYSTEM
New Generation Storage
BIODIVERSITY AND HEMP, NEW ENCLAVES IN THE EUROACE REGION
The Place for Arts-Driven Blue Innovation
Betão de elevada performance com agregados e fibras reciclados
Multifunctional, customisable and sustainable cladding solutions containing wastes from the paper pulp industry
SELFLIVINGBOX - Development of intelligent compartments for use in environments with highly demanding conditions
Development of eco-efficient products based on cementitious composites incorporating industrial wastes
Ecossistema de Inovação para a Transferência de Conhecimento e Tecnologia da Região Centro
Industrialização de painéis de elevada dimensão para construção de diferentes tipologias de edifícios com vários pisos
European Digital Innovation Hub
Inovação em refrigeração sustentável
Digital Innovation Hub da Região Centro
Plataforma dedicada ao desempenho energético de edifícios à luz da EPBD 2024
Pre-manufactured thermal insulation system with easy-fix connectors for buildings application
Advanced LSF system with innovative profiles and composite panels with elevated thermal and environmental performance with optimized manufacturing and installation processes
Biodiversity & Green in Mediterranean Historic Cities
Salt Water Pool Optimization with Integrated Sustainable Elements
Development of sustainable insulation materials for building systems
Smart and Self-sufficient Pergola, Functional in Adverse Events
Dispositivo Multifuncional e Inteligente, Alinhado com os Princípios da Neutralidade Carbónica
Development and optimization of industrial mixer for vacuum infusion processes
Re-designing the construction sector: Sustainable and functional bio-based construction products and building elements
Building the capacity of SME in the construction sector to assess and communicate life-cycle environmental performance
Plataforma para a qualificação dos Operadores Económicos (PMEs) no processo de marcação CE de produtos de construção
Innovative Multilayer Panels for Smart Buildings
Bloco de elevado desempenho Térmico e Ambiental para alvenaria Estrutural
Sistemas inteligentes de monitorização autónomos de pontes pedonais suspensas leves e com grandes vãos
1ª EDIÇÃO | E-LEARNING (CURSO SÍNCRONO)
3ª Edição
1ª Edição
13ª Edição
4ª Edição | Módulo 1
4ª Edição | Módulo 2
4ª Edição
7ª Edição
8ª Edição | Presencial
1st Edition
9ª Edição
1ª EDIÇÃO
E-LEARNING | 14ª Edição
4ª Edição | E-learning (curso síncrono)
1ª Edição | b-learning
2ª EDIÇÃO | E-LEARNING (CURSO SÍNCRONO)
36ª Edição | Online
26ª Edição | online
E-LEARNING | 15ª Edição
13ª Edição | online
3ª Edição | Online (curso síncrono)
1ª EDIÇÃO | ONLINE (CURSO SÍNCRONO)
1ª EDIÇÃO | PRESENCIAL
9ª Edição | Civil 3D Nível II | Presencial
2ª EDIÇÃO | ONLINE (CURSO SÍNCRONO)
4ª Edição | Presencial
1ª Edição | Presencial
5ª EDIÇÃO | ONLINE (CURSO SÍNCRONO)
3ª EDIÇÃO | PRESENCIAL
14ª Edição | ONLINE (CURSO SÍNCRONO) | Preço para PME: 50€*
6ª EDIÇÃO | ONLINE (CURSO SÍNCRONO) | Preço para PME: 23,75€*
24ª Edição | ONLINE (CURSO SÍNCRONO) |Preço para PME: 50€*
2ª Edição | Presencial | Preço para PME: 9,40€*
1ª EDIÇÃO | PRESENCIAL| Gratuita
10ª Edição | online | Preço para PME: 28,75€*
11ª EDIÇÃO | ONLINE (CURSO SÍNCRONO) | Preço para PME: 37,50€*
2ª Edição | ONLINE (CURSO SÍNCRONO) | Preço para PME: 31,25€*
1ª Edição | ONLINE (CURSO SÍNCRONO) |Preço para PME: 10€*
10ª Edição | Módulo 1 | Presencial
10ª Edição | Módulo 2 | Presencial | Preço para PME: 29,38€*
4ª Edição | Presencial | Preço para PME: 42,50€*
3ª EDIÇÃO | PRESENCIAL | Preço para PME: 34,40€*
12ª Edição | online | Preço para PME: 31,25€*
15ª Edição | ONLINE (CURSO SÍNCRONO) | Preço para PME: 50€*
4ª EDIÇÃO | ONLINE (CURSO SÍNCRONO) | Preço para PME: 50€*
Titopinta, Lda.
Modern Yellow Lda.
Almerindo & Ana -Sociedade de Construção Civil, Lda.
Salva Casas, Lda.
Manuel Simões Lourenço Oliveira
L Rebourém, Lda.
Sociedade de Construções Luis Caçador, Lda.
Isosombra Isolamentos, Lda.
José Augusto de Sousa Ribeiro, Sociedade Unipessoal, Lda.
Printlar – Unipessoal, Lda.
Design ao Quadrado, Unipessoal, Lda.
Daniel Reis Vieira
Detalhe Exemplar, Lda.
Cunha e Costa, Construção e Engenharia, Lda.
Flávio Pardal Timóteo
Balance Search Unipessoal
Jorge Lopes da Costa Construções e Revestimentos, Lda.
J.M. Almeida e Sousas, Lda.
Travessas e Quadrados, Lda.
Brito Costa & Costa, Lda.
Almerindo & Ana, Lda
The 4th Energy for Sustainability International Conference – Designing a sustainable future is ta...
The 8th International Conference on Energy and Sustainability is organised by Wessex Institute (U...
The 42nd International Conference on Boundary Elements and other Mesh Reduction Methods is organi...
The 2nd Symposium on Acoustics and Vibrations will take place in Coimbra on 24th May 2019. The go...
The first International Conference on Construction, Energy, Environment and Sustainability - CEES...
The National Innovation Agency (ANI) is promoting the Cycle of Events - Dynamics for Innovation. ...
This event is only available in the Portuguese language.
The “Plataforma DreAM - DigitAl Management” event is the Digital Closing Session of the DreAM – D...
The IV Symposium on Mortars and Thermal Coating Solutions will be held in Coimbra in 10 and 11 Ma...
NewAppBurel Project Session is available in Portuguese only.
Pumping System Demonstration session[PT only]
The second International Conference on Construction, Energy, Environment and Sustainability - CEE...
A MCG, a Aralab e o Itecons têm o prazer de o convidar a assistir à sessão de encerramento do pro...
Event in PT only.
Session is available in PT only.
Open day organized in the context of ANI's Tech@weeks initiative.Event will take place in PT only.
Event will take place in PT only.
This event will take place in PT only.
Event in PT only
The first symposium E2H on "Energy and water efficiency of buildings and communities" will be hel...
The worshop will take place in PT only.
The third International Conference on Construction, Energy, Environment and Sustainability - CEES...
The V Symposium on Mortars and Thermal Coating Solutions will be held in Coimbra in 11 and 12 jul...
The 3rd Symposium on Acoustics and Vibrations will be held in Coimbra on 7th Novembro 2025. This ...
On 14 March, the Final Event of the LIFE ReNatural NZEB Project will take place at the Complejo C...
The 2nd edition of the New European Bauhaus Festival will take place in Coimbra in the form of a ...
The National Congress on Concrete Prefabrication– ANIPB 2025 will take place in Coimbra on 16 and...
Realizou-se no ITeCons mais uma reunião dos parceiros nucleares do projeto INOV C 2020.Este proje...
O ITeCons é um Organismo de Avaliação Técnica reconhecido pela Comissão Europeia para o estabelec...
This event, organised by Itecons, aims to be a forum for sharing, discussion and reflection where...
O Itecons informa que se encontra aberto um concurso para uma Bolsa de Investigação (BI, refª BI/...
Decorreu na passada sexta-feira, na Ordem dos Engenheiros, Região Norte, no Porto, o seminário Ex...
Apenas estão abertas as candidaturas a Vales “Oportunidades de Investigação” em Lisboa 2020 e ser...
Continuam abertas as candidaturas a Vales “Economia Circular” (Aviso encerrado para o Norte 2020 ...
Apenas estão abertas as candidaturas a Vales “Indústria 4.0” em Lisboa 2020 e será suspensa a sua...
Apenas estão abertas as candidaturas a Vales “Comércio” em Lisboa 2020 e será suspensa a sua rece...
O ITECONS PRETENDE CONTRATAR UM ENGENHEIRO CIVIL (M/F)REQUISITOS- Engenheiro(a) Civil, com licenc...
O ITECONS PRETENDE CONTRATAR UM ENGENHEIRO GEÓLOGO (M/F)REQUISITOS- Engenheiro(a) Geólogo ou Geot...
O Itecons – Instituto de Investigação e Desenvolvimento Tecnológico para a Construção, Energia, A...
A APFAC irá realizar Jornadas ETICS dirigidas à generalidade dos agentes do sector da construção:...
O Itecons apoia a divulgação do Seminário sobre o Decreto-Lei n.º 95/2019 — Novo regime da Reabil...
INNOVIP is a EU funded project that focuses on the development of a highly efficient and multifun...
É já no próximo dia 19 de novembro, que se irá realizar no Itecons, o Workshop sobre Coberturas V...
O Itecons esteve presente na segunda edição da Conferência "Inovação Aberta em Portugal" organiza...
Professionals and manufacturers, join us and share your energy and water efficiency solutions.Fin...
O Itecons apoia a divulgação do COTEC Innovation Summit que decorrerá no próximo dia 22 de junho....
A Região Centro da Ordem dos Engenheiros, em parceria com o - Itecons - Instituto de Investigação...
Desde o dia 17 de janeiro, todos os associados da ANIET| Associação Nacional da Indústria Extrati...
O artigo “A aplicação de painéis de vácuo em paredes leves – desempenho acústico” foi publicado n...
A Ponte Pedonal 516 Arouca venceu a categoria de Melhor Projeto Público na Área da Engenharia dos...
Within the scope of the Heat Pump KEYMARK, Itecons has been recognised together with CERTIF to ca...
A partir do dia 3 de maio pode visitar Ponte 516Arouca.No Itecons adoramos um bom desafio! Projet...
Um dos elementos importantes da estrutura da ponte 516 Arouca são os cabos de aço das catenárias ...
O Webinar sobre Gestão da Vegetação na Interface Urbano-Florestal, realizado no âmbito do projeto...
The project PEACOC | PErsonAlised e-Business Coaching for Construction SMEs is being co-promoted ...
O projeto TESTA+ (refª POCI-01-0247-FEDER-038356 / LISBOA-01-0247-FEDER-038356), desenvolvido em ...
No passado dia 1 de julho de 2021, produziu efeitos a entrada em vigor do Decreto-Lei nº 101-D/20...
A ponte pedonal suspensa 516 Arouca está no Top 100 dos melhores locais do Mundo da revista Time!...
O Itecons e a CCDRC vêm propor, uma vez mais, trazer à sociedade uma nova mostra de soluções e ma...
Itecons and ISR - University of Coimbra are jointly promoting the talk "Known and suspected effec...
A ponte 516 Arouca foi eleita pelos World Travel Awards como Europe's Leading Tourist Attraction ...
O referido Decreto-lei entra em vigor no próximo dia 5 de dezembro e obriga que o betão destinado...
A Silva & Ventura, WSBP e Itecons estão a organizar o Webinar “S&V SunRoof - CLARABOIA D...
O Itecons, enquanto parceiro no projeto INOVC+, esteve presente na sessão de lançamento do projet...
Prémio ATEG de Arquitectura y Construcción Otilio García 2021A Ponte Pedonal 516 Arouca foi disti...
REQUISITOS- Engenheiro Mecânico, Eletrotécnico, ou áreas afins (M/F)- Experiência no desenvolvime...
DIGITALbuilt acaba de ser reconhecido como European Digital Innovation Hub!O DIGITALbuilt, a inic...
O projeto CorkAL, desenvolvido pela empresa Hydro (promotor líder), Amorim Cork Composites e Itec...
A ponte pedonal suspensa 516 Arouca está selecionada pela IABSE - International Association for B...
REQUISITOS- Engenheiro Acústico, Eletrotécnico, Físico ou áreas afins (M/F)- Experiência na área ...
Itecons was recently recognised as a CTI entity - Technology and Innovation Centre, according to ...
Após o sucesso das Exposições de Materiais de Construção Sustentável organizadas pelo Itecons em ...
Quer fazer parte da nossa equipa?O Itecons pretende contratar um Técnico de laboratório para a Se...
Itecons is the institution responsible for the management and hosting of CERIS Coimbra, a Pole of...
Quer fazer parte da nossa equipa?O Itecons pretende contratar um Técnico de laboratório (m/f).REQ...
Quer fazer parte da nossa equipa?O Itecons pretende contratar um Engenheiro Acústico/Eletrotécnic...
Decorreu, nos passados dias 30 de novembro e 7 de dezembro, a primeira edição da ação de formação...
Foi inaugurado no passado dia 9 o mais recente edifício do itecons. Representa um investimento de...
No dia 5 de junho de 2024, pelas 10H30, a Subcomissão 3 “Rotulagem Ambiental” da Comissão Técnica...
O projeto em copromoção "Smart Roofs System" permitiu o desenvolvimento de um sistema avançado de...
Quer fazer parte da nossa equipa?O Itecons pretende contratar um Engenheiro Civil do perfil de es...
Quer fazer parte da nossa equipa?O Itecons pretende contratar um Engenheiro Civil.LOCAL DE TRABAL...
O Itecons, em parceria com a Águas do Algarve, S.A. (AdA) e o Instituto Superior de Engenharia da...
O Itecons obteve a sua Acreditação como Laboratório de Calibração.A Secção de Calibração integrad...
Itecons Anechoic Chamber – Silence engineered for precision acoustic testingAt Itecons, in Coimbr...
O Itecons pretende reforçar a sua equipa da Unidade de Avaliação Técnica com a contratação de um/...
O Itecons foi oficialmente reconhecido pela DIN CERTCO como laboratório autorizado no âmbito do p...
ABERTURA DE VAGA | ENGENHEIRO CIVIL (M/F)REQUISITOS- Mestrado em Engenharia Civil (M/F)- Experiên...
Avaliação do modelo de governança, da infraestrutura física, do suporte aplicacional, do plano de...
REQUISITOS- Mestrado em Engenharia Civil (M/F)- Formação e experiência na modelação estática e di...
Quer fazer parte da nossa equipa?O Itecons pretende contratar um Engenheiro Civil (m/f) para atua...
Cluster
Protocol
Collaborative Network
Associations
Innovation Hub
Honorary Founder: Honorary Type 1
Honorary Founder: Honorary Type 2
Honorary Founder: Honorary Type 3
Founding Associate Member: Class A
Founding Associate Member: Class C
Founding Associate Member: Class D
Founding Associate Member: Class E
Associate Member: Class E
Associate Member: Class B
Associate Member: Class D
Associate Member: Class C
Associate Member: Class A
Tem a certeza que deseja proceder com esta ação?